Author Topic: Amstrad CPC WiFi (Read 410719 times)

CPC_Fan · « **Reply #200 on:** 18:24, 30 May 16 »

@Duke - Could I have mine fully assembled with a MX4 (Mother x4) connector please, as I want to use it with the Mother x4 board that I brought from Tot0. Thank you.

skywalky · « **Reply #201 on:** 18:56, 30 May 16 »

Mine in MX4 format, please.
Thank you

dirtybb · « **Reply #202 on:** 20:28, 30 May 16 »

Hi,

@Duke, same thing, please concider MX4 connector for mine.
Many Thanks.

Envoyé de mon iPhone en utilisant Tapatalk

Rennert · « **Reply #203 on:** 22:14, 30 May 16 »

Hi Duke, please change my order from Post #59. I need a MX4 connector. Thx.

Rennert · « **Reply #204 on:** 22:16, 30 May 16 »

Etegar · « **Reply #205 on:** 07:58, 31 May 16 »

Duke, i want a M4 Board with Edge connector plus Adapter PCB assembled. Thanks.

Scarlettkitten · « **Reply #206 on:** 13:31, 31 May 16 »

MX4 connector for mine please, thanks Duke.

Vandalsk · « **Reply #207 on:** 15:44, 31 May 16 »

Great, i'm on the list

.
Please change my order in MX4 connector too.
Thanks a lot.

tvandor · « **Reply #208 on:** 18:56, 31 May 16 »

Hi Duke,

Tamas here, I am glad that I am on the list! :-)
Please make a board for me with the M4 connector please.
(Since I own a Schneider CPC6128, I am unable to use of the edge adapter.)

Thanks a lot,

Tamas

Jungsi · « **Reply #209 on:** 19:14, 31 May 16 »

Hi, here the same: #3 on the List ;-)
Because of CPC6128 please with MX4 for me - thanks!

Duke · « **Reply #210 on:** 19:54, 31 May 16 »

Just to avoid any misunderstandings:

Regular CPC has edge connector. CPC+ and Schneider CPC have centronics connector.

If you have a regular CPC (not plus or schneider) you will need M4 with Edge connector.
Unless you have or buy:
MotherX4 board+cable (from Toto @ MotherX4 Main Board)
or a "Edge cable for MotherX4" (from Toto @ MotherX4 Main Board)
or you order adapter PCB (which has 1 MX4 slot and edge connector).

If you have a CPC+ or Schneider with centronics connector, you will need M4 with MX4 connector and:
MotherX4 board+cable (from Toto @ MotherX4 Main Board)
or a " Centronic cable for MotherX4" (from Toto @ MotherX4 Main Board)

Quote from: Etegar on 07:58, 31 May 16

Duke, i want a M4 Board with Edge connector plus Adapter PCB assembled. Thanks.

Quote from: Jungsi on 19:14, 31 May 16

Hi, here the same: #3 on the List ;-)
Because of CPC6128 please with MX4 for me - thanks!

reidrac · « **Reply #211 on:** 20:00, 31 May 16 »

Quote from: Duke on 19:54, 31 May 16

Just to avoid any misunderstandings:

Regular CPC has edge connector. CPC+ and Schneider CPC have centronics connector.

If you have a regular CPC (not plus or schneider) you will need Edge connector.

I have a regular Amstrad CPC 464 without add-ons.

Duke · « **Reply #212 on:** 20:04, 31 May 16 »

In that case you will need M4 with edge connector, unless you want to buy Edge cable/mx4/adapter pcb.

Quote from: reidrac on 20:00, 31 May 16

I have a regular Amstrad CPC 464 without add-ons.

reidrac · « **Reply #213 on:** 20:52, 31 May 16 »

Quote from: Duke on 20:04, 31 May 16

In that case you will need M4 with edge connector, unless you want to buy Edge cable/mx4/adapter pcb.

I was confused by the terminology. Thanks for the clarification!

M4 with edge connector then.

radu14m · « **Reply #214 on:** 21:04, 31 May 16 »

M4 with MX4 connector for me please.

Jungsi · « **Reply #215 on:** 21:35, 31 May 16 »

Quote from: Jungsi on 19:14, 31 May 16

Hi, here the same: #3 on the List ;-)
Because of CPC6128 please with MX4 for me - thanks!

Then this is the right one (for my CPC6128 with Mother X4): :-)
M4 with MX4 connector

TFM · « **Reply #216 on:** 21:39, 31 May 16 »

Also for me please the MX4 connector: M4 Board with MX4 connector

Thank you!

EDIT: Oh and if this is possible, please add the real RTC to the board, so I can support it with FutureOS.

btw: Would be nice if everybody gets one first, and then after that, everybody get's the 2nd board. So in my case I ordered two, I'm fine with getting one first, and after everybody has one I take the 2nd. So nobody needs to wait too long.

Duke · « **Reply #217 on:** 21:41, 31 May 16 »

Yes suspected that was case because of a missing comma possible I was in doubt

Quote from: Jungsi on 21:35, 31 May 16

Then this is the right one (for my CPC6128 with Mother X4): :-)
M4 with MX4 connector

Duke · « **Reply #218 on:** 21:47, 31 May 16 »

Technically that's how it should be, but sensible lets save the shipping cost, the biggest hurdle for me right now is I don't have all the components (30+ packets on its way from china).
Once they start pouring in 1 or 2 boards wont matter much timewise anyway.

Quote from: TFM on 21:39, 31 May 16

btw: Would be nice if everybody gets one first, and then after that, everybody get's the 2nd board. So in my case I ordered two, I'm fine with getting one first, and after everybody has one I take the 2nd. So nobody needs to wait too long.

TFM · « **Reply #219 on:** 21:52, 31 May 16 »

Oh, yes, forgot about that. Good point

Joseman · « **Reply #220 on:** 22:22, 31 May 16 »

@Duke M4 with MX4 connector for me too!

archcosmo · « **Reply #221 on:** 08:11, 01 June 16 »

@Duke please update my order to be: an M4 board with MX4 connector.
I have an MX4 board, so would prefer to connect it to my CPC through that.

thanks

tvandor · « **Reply #222 on:** 08:30, 01 June 16 »

Hi @Duke, thank you for your post about the connectors!
I would like an M4 with MX4 connector then.

Thanks a lot,

Tamas

AlexD · « **Reply #223 on:** 10:38, 01 June 16 »

Hi,
would it still be possible to get one with MX4 connector ?

Thanks !

Duke · « **Reply #224 on:** 13:30, 01 June 16 »

Yes, but be aware the list is very long now, so it may take significant amount of time before its ready.

Quote from: AlexD on 10:38, 01 June 16

Hi,
would it still be possible to get one with MX4 connector ?

Thanks !

News:

Author Topic: Amstrad CPC WiFi (Read 410719 times)