News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_Duke

Amstrad CPC WiFi

Started by Duke, 07:36, 07 May 16

Previous topic - Next topic

0 Members and 10 Guests are viewing this topic.

CPC_Fan

@Duke - Could I have mine fully assembled with a MX4 (Mother x4) connector please, as I want to use it with the Mother x4 board that I brought from Tot0. Thank you.

skywalky

Mine in MX4 format, please.
Thank you

dirtybb

Hi,

@Duke, same thing, please concider MX4 connector for mine.
Many Thanks.


Envoyé de mon iPhone en utilisant Tapatalk

Rennert

Hi Duke, please change my order from Post #59. I need a MX4 connector. Thx.
...KC Compact

Rennert

...KC Compact

Etegar

Duke, i want a M4 Board with Edge connector plus Adapter PCB assembled. Thanks.

Scarlettkitten

MX4 connector for mine please, thanks Duke.
Sophie Rose:- My musical works https://soundcloud.com/sophierosemusics

Vandalsk

Great, i'm on the list  :) .
Please change my order in MX4 connector too.
Thanks a lot.
- Schneider CPC 6128 & 3,5" Floppy, Multiface II, Videodigitizer, Symbiface II, Dobbertin Ram Expansion 512 Kb, Marconi Trackball, CPC Booster+, X-Board, X-Mem, HXC Floppy Emulator
- Sinclair PC 200
- Schneider PC 1640
- Atari STf
- Vtech Laser 310, 64 KB Ram, PI 20 Printer Interface,  LP 20 Lightpen, Laser JI 20 Joysticks, Erweiterungsplatine, PP40 Plotter, DD 20 5,25" Floppy, SANYO DM 2112 Monitor
Amstrad NC-100
Atari ST 1040
Amiga 500
Commodore C 64

tvandor


Hi Duke,


Tamas here, I am glad that I am on the list! :-)
Please make a board for me with the M4 connector please.
(Since I own a Schneider CPC6128, I am unable to use of the edge adapter.)


Thanks a lot,


Tamas







Jungsi

Hi, here the same: #3 on the List ;-)
Because of CPC6128 please with MX4 for me - thanks!

Duke

#210
Just to avoid any misunderstandings:

Regular CPC has edge connector. CPC+ and Schneider CPC have centronics connector.

If you have a regular CPC (not plus or schneider) you will need M4 with Edge connector.
Unless you have or buy:
MotherX4 board+cable (from Toto @ MotherX4 Main Board)
or a "Edge cable for MotherX4" (from Toto @ MotherX4 Main Board)
or you order adapter PCB (which has 1 MX4 slot and edge connector).

If you have a CPC+ or Schneider with centronics connector, you will need M4 with MX4 connector and:
MotherX4 board+cable (from Toto @ MotherX4 Main Board)
or a " Centronic cable for MotherX4" (from Toto @ MotherX4 Main Board)


Quote from: Etegar on 05:58, 31 May 16
Duke, i want a M4 Board with Edge connector plus Adapter PCB assembled. Thanks.

Quote from: Jungsi on 17:14, 31 May 16
Hi, here the same: #3 on the List ;-)
Because of CPC6128 please with MX4 for me - thanks!

reidrac

Quote from: Duke on 17:54, 31 May 16
Just to avoid any misunderstandings:

Regular CPC has edge connector. CPC+ and Schneider CPC have centronics connector.

If you have a regular CPC (not plus or schneider) you will need Edge connector.

I have a regular Amstrad CPC 464 without add-ons.
Released The Return of Traxtor, Golden Tail, Magica, The Dawn of Kernel, Kitsune`s Curse, Brick Rick and Hyperdrive for the CPC.

If you like my games and want to show some appreciation, you can always buy me a coffee.

Duke

#212
In that case you will need M4 with edge connector, unless you want to buy Edge cable/mx4/adapter pcb.

Quote from: reidrac on 18:00, 31 May 16
I have a regular Amstrad CPC 464 without add-ons.

reidrac

Quote from: Duke on 18:04, 31 May 16
In that case you will need M4 with edge connector, unless you want to buy Edge cable/mx4/adapter pcb.

I was confused by the terminology. Thanks for the clarification!

M4 with edge connector then.
Released The Return of Traxtor, Golden Tail, Magica, The Dawn of Kernel, Kitsune`s Curse, Brick Rick and Hyperdrive for the CPC.

If you like my games and want to show some appreciation, you can always buy me a coffee.

radu14m

M4 with MX4 connector for me please.

Jungsi

#215
Quote from: Jungsi on 17:14, 31 May 16
Hi, here the same: #3 on the List ;-)
Because of CPC6128 please with MX4 for me - thanks!

Then this is the right one (for my CPC6128 with Mother X4): :-)
M4 with MX4 connector

TFM

#216
Also for me please the MX4 connector: M4 Board with MX4 connector

Thank you!  :)

EDIT: Oh and if this is possible, please add the real RTC to the board, so I can support it with FutureOS.




btw: Would be nice if everybody gets one first, and then after that, everybody get's the 2nd board. So in my case I ordered two, I'm fine with getting one first, and after everybody has one I take the 2nd. So nobody needs to wait too long.  :)
TFM of FutureSoft
Also visit the CPC and Plus users favorite OS: FutureOS - The Revolution on CPC6128 and 6128Plus

Duke

Yes suspected that was case because of a missing comma possible I was in doubt :)

Quote from: Jungsi on 19:35, 31 May 16
Then this is the right one (for my CPC6128 with Mother X4): :-)
M4 with MX4 connector

Duke

#218
Technically that's how it should be, but sensible lets save the shipping cost, the biggest hurdle for me right now is I don't have all the components (30+ packets on its way from china).
Once they start pouring in 1 or 2 boards wont matter much timewise anyway.

Quote from: TFM on 19:39, 31 May 16

btw: Would be nice if everybody gets one first, and then after that, everybody get's the 2nd board. So in my case I ordered two, I'm fine with getting one first, and after everybody has one I take the 2nd. So nobody needs to wait too long.  :)

TFM

Oh, yes, forgot about that. Good point :)
TFM of FutureSoft
Also visit the CPC and Plus users favorite OS: FutureOS - The Revolution on CPC6128 and 6128Plus

Joseman

@Duke M4 with MX4 connector for me too!  ;)

archcosmo

@Duke please update my order to be: an M4 board with MX4 connector.
I have an MX4 board, so would prefer to connect it to my CPC through that.

thanks

tvandor

Hi @Duke, thank you for your post about the connectors!
I would like an M4 with MX4 connector then.


Thanks a lot,


Tamas





AlexD

Hi,
would it still be possible to get one with MX4 connector ?


Thanks !

Duke

Yes, but be aware the list is very long now, so it may take significant amount of time before its ready.

Quote from: AlexD on 08:38, 01 June 16
Hi,
would it still be possible to get one with MX4 connector ?


Thanks !

Powered by SMFPacks Menu Editor Mod