News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_TFM

X-MASS and CPC-IDE

Started by TFM, 17:02, 09 January 15

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

TFM

17:02, 09 January 15
Does anybody know if the X-MASS is compatible to the CPC-IDE?

The CPC-IDE was developed before the SF2 and it found its way into the SF2 eventually.
So I assume the X-MASS is compatible to the CPC-IDE.

Personally I don't have access to both, anybody else?
TFM of FutureSoft
Also visit the CPC and Plus users favorite OS: FutureOS - The Revolution on CPC6128 and 6128Plus

TotO

#1
18:57, 09 January 15
May be better to ask the question on the X-MASS topic, instead of oppening one only for that. :)
The X-MASS use the same ports range. Like the SF2 does too. So, it should be compatible with the existing software.
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)

TotO

#2
10:56, 02 March 15 Last Edit: 11:00, 02 March 15 by TotO
The boards built last week... May be yours are here and ready to be shipped!  :-*


[attachimg=1]
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)

TFM

#3
18:43, 02 March 15
All this boxes with hooks ... you must be doing very, very intensive quality control and testing!!!  :) :) :)


Deserves the name ACME *Thumbs-up-Smiley*
TFM of FutureSoft
Also visit the CPC and Plus users favorite OS: FutureOS - The Revolution on CPC6128 and 6128Plus
Print
Go Up Pages1
User actions
Powered by SMFPacks Menu Editor Mod