News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_Bignumbas

LCD Screen found that supports 15khz

Started by Bignumbas, 03:39, 23 February 17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bignumbas

I found this screen today.
An Asus VS248, version VS248H.
Manufactured June 2013.
I have a 6128 plugged directly into it.
It is stretched though and there is no 4:3 mode available


;D
The cutting edge of technology is covered in blood!

Poliander

#1
Nice finding, thanks! Did you use only a simple RGB-to-VGA-Cable?
Schneider CPC 664 • X-MEM • Vortex F1-X Drive • CTM 644 • DMP 2160
Schneider CPC 6128 • Z-MEM • M4 Board • MultiPlay + Amiga Mouse • OSSC

Bignumbas

Yes I used a din to 15 pin VGA adapter I made, that's all.
I hate soldering video cables to din plugs, they are never easy.



The cutting edge of technology is covered in blood!

Gryzor

That's very neat and simple, but pity about the stretching...

NiNxPe


||C|-|E||


Bignumbas

#6
Normaly I use an arcade video converter although I do have a scart monitor and another small 15 hz lcd
I have to make a scart cable up one day.
But even stretched its so clear and crisp.
I don't really notice the stretching when using it, all 24"  :P
I remember my 644 colour monitor back in '85 and wishing it could be as clear as EGA monitors were then.
They are really bad for the eyes, all pixelated......


Some more lists, but they are all hard to find

http://www.atari-wiki.com/index.php/Flat_Panel_Displays
http://www.retropix.com.br/lista-de-monitores-que-aceitam-15khz/
The cutting edge of technology is covered in blood!

villain


imperious

I had been using the GBS8200 with my Dell Monitor U2412M and the white speckles were a bit annoying.
Anyway I thought, why not plug the cable in direct and see what happens, and it works perfectly, pics attached.
With respect to the GBS8200 there is a copper tape fix, and I just tried that and no more speckles. I got the idea
from here 
https://www.youtube.com/watch?v=p2Hd0KO28FU
The colour is a lot better than the photo's show.


1024MAK

@imperious thanks for posting that video. Most helpful, as I have a GBS-8200 that has really annoying sparkles. I shall have to get some copper tape and give it a try.

Mark
Looking forward to summer in Somerset :-)

||C|-|E||

God, that Mario is disturbing. Itseems that the gorilla is protecting her  :-\

imperious

#11
Quote from: 1024MAK on 18:37, 03 March 17
@imperious thanks for posting that video. Most helpful, as I have a GBS-8200 that has really annoying sparkles. I shall have to get some copper tape and give it a try.

Mark

I used the 20mm wide tape, there's plenty of sellers on Ebay.

VincentGR

Nice!!!


Can I have the schematic? I have a NEC that supports 15khz.

Powered by SMFPacks Menu Editor Mod