HI,
excuse my english.
I'm searching a way to add memory to my CPC6128 and CPC6128.
it can be two different hardwares. My goal is to run demos and symbos, so i would like it compatible.
Ideally i would like it internal (if possible)
And finally i don't want to buy iy, but build it because it is fun ! No problem in soldering and unsoldering...
I searched for all infos and i didn't found a way to add 512Ko by myself ;-)
Thanks for your help !
X-Mem!
^^^What he said, plus the ROAM board (if you manage to find any)
Hi,
as i said i would like to buy it because it is more fun. I saw x-men is the state of art, but it more a hobby for me.
Is it just possible to add or change the ram chip in the cpc / cpc+ ?
I prefer internal, i don't like to have a lot of card plug to my extension port :D
One of my CPCa has internal 4 MB of RAM and 2.5 MB of Flash-ROM. Works well with my favorite OS too. ;) You can get information there (and contact too):
CPC4MB RAM upgrade -- 8bit Projects For Everyone (http://8bit.yarek.pl/upgrade/cpc.cpc4mb/index.html)
Quote from: talrek on 21:40, 15 September 14I prefer internal, i don't like to have a lot of card plug to my extension port :D
You should build an internal 2x25pin expansion connector from the expansion port pin dots. Then, plug the X-MEM inside and get 512K RAM and 512K ROM, w/o needing to use the external expansion port. (keep free for use)
Quote from: talrek on 21:40, 15 September 14
as i said i would like to buy it because it is more fun. I saw x-men is the state of art, but it more a hobby for me.
I read that after I posted !
I agree with TFM, look at Yarek's pages:
http://8bit.yarek.pl/upgrade/cpc.cpc4mb/ (http://8bit.yarek.pl/upgrade/cpc.cpc4mb/)
Thank you for your help !!! it is really great to see such community. Why did i wait soooo long to join you ???? :D
Problem is, the file cpc4mb1.zip is no longer available on yarek's site... so i can't take eagle files... does someone has it ? it would be great !!!
I thought it was possible to solder extra rams + capacitor and modify the PAL.
welcome talrek ;)
nice to see you here too !
Quote from: radu14m on 19:57, 16 September 14
welcome talrek ;)
nice to see you here too !
Hi ! The world of cpc is very small :)
Quote from: talrek on 21:58, 16 September 14
Hi ! The world of cpc is very small :)
Small but Perfectly formed :D
We are a friendly lot really!
Craig
Hi Talrek,
we already know each other from yAronet. How are the "Bryce Clones" getting on? Are you still making batches of hardware?
Bryce.
Yes i do it, but with very little quantities.
Since the last time, i made 10 digiblasters, 5 mouse adapters, 4 megaflashes and i'm soldering 10 svideos. All "Bryce"'s creations ;D
I'd like to have more time, but it is just a hobby and there is only 24 hours in a day :(
"Bryce Clones" ;)
I still want an AMX mouse adapter !!! :laugh:
Quote from: radu14m on 18:02, 17 September 14
"Bryce Clones" ;)
I still want an AMX mouse adapter !!! :laugh:
Yes i noticed :laugh:
Ok i'm going to order 10 x PCB Tomorrow :)
10 pcs ??? :o
He shoun't order less. :-\
Quote from: talrek on 17:58, 17 September 14
Yes i do it, but with very little quantities.
Since the last time, i made 10 digiblasters, 5 mouse adapters, 4 megaflashes and i'm soldering 10 svideos. All "Bryce"'s creations ;D
I'd like to have more time, but it is just a hobby and there is only 24 hours in a day :(
Great that you are producing them. I have even less time, so it's great to see my hardware is still being made available (without me having to make them :D ).
Bryce.
Quote from: talrek on 18:41, 17 September 14
Yes i noticed :laugh:
Ok i'm going to order 10 x PCB Tomorrow :)
If that's a supply of Bryce mouse adaptors, Can I order one too :)
Hi,
Before ordering the pcb, i should ask if anyone wants another, because if there is more than 10.. i will order more PCB.
Waoouhhh my wife and my kids are going to hate me for that....
So let's go ; 2 bryce's mouse adapters.
But to close the memory problem, i think i will buy the mermory card. Then i will solder it inside.
I just don't know in which computer i will solder it (6128 or the +)
Hi Talrek!
You should create an own thread for the mouse adapters, else 90% of the people will just oversee it. :)