0 Members and 1 Guest are viewing this topic.
Could you take some photos, too, please?
;; I did not use CPCPlus equ 1 ;; MODE 2 results ;; GX4000: ;; white, pastel yellow,bright white, bright yellow, bright red, blue, green, sea green ;; border is pastel yellow. ;; Text is !"#$% etc ;; Grey extends up to but not including last pixel of "(" (i.e. there are two dots which are the final ;; pixel graphics of the bracket.). The dots are pastel yellow.and are a single mode 2 pixel in size. ;; ;; 464 Plus: same as GX4000 ;; ;; 6128 type 2 CRTC. believed 40010. Edge connectors ;; border shifted compared to Plus. by 1 CRTC char ;; grey split not so obvious, bright yellow split shows two dots from first pixel of E. Remainder of E is bright red. ;; ;; 6128 type 1 CRTC. believed 40010. Has German connectors. ;; Seems same as type 2, but less obvious probably because of ghosting on my monitor. ;; ;; 6128 type 0 CRTC. believed 40010. Edge connectors ;; same as type 2. ;; ;; MODE 1 results: ;; GX4000 ;; split is start of $ symbol. First mode 1 pixels of the graphics are grey, rest ;; is pastel yellow ;; red to blue happens ~2 mode 1 pixels into the 8 ;; ;; yellow to red happens 2 pixels into the 3 ;; 6128 type 2 CRTC ;; same as type 0 ;; 6128 type 1 CRTC. ;; same as type 0, 2 seems to be 3 mode 1 pixels in. (strangely with my dodgy screen ;; this is the only one where there is flicker at the grey and pale yellow transition and ;; bright green and pastel green. No idea why). ;; ;; 6128 type 0 CRTC. ;; grey split mid #, bright yellow split mid 2, bright white split mid -. ;; ;----------------------------------------- ; JavaCPC RasterPaint Assembly code ; Authors: Oliver M. Lenz, Markus Hohmann ;----------------------------------------- org &8000 ; CALL &8000 OldCPC EQU 1 ; Set this to 0 for CPC Plus / Newer CPC Models. MODE2 EQU 1start: ld a,1 ;; MODE 1! if MODE2 ld a,2 ;; MODE 2! endif call &bc0e ld hl,&c000 ld e,l ld d,h inc de ;;ld (hl),&ff ld (hl),%11110000 if MODE2 ld (hl),&ff endif ld bc,&3fff ldir ;;ld b,80 ld b,40 if MODE2 ld b,80 endif ld a,' 's1: push bc push af call &bb5a pop af inc a cp 127 jr nz,s2 ld a,' 's2: pop bc djnz s1 di im 1 ei ld bc,&7f10 out (c),c ld bc,&7f43 out (c),cnewframe: ld HL,(&0038) ld (rstsave),HL ld HL,&C9FB ld (&0038),HL ld B,&F5waitvsync: in A,(C) rra jp nc,waitvsync halt halt di ld DE,&1702waitforstart: dec D jr nz,waitforstart dec E jr nz,waitforstart nop IF OldCPC nop ENDIF ld BC,&8080 out (C),C ; select pen 1 ld HL,colours ld DE,&0203 ld A,&01.nextline rept 200 outi ; 5 outi ; 5 outi ; 5 outi ; 5 outi ; 5 outi ; 5 outi ; 5 outi ; 5 ; 40 out (C),D ; 4 ; pen 2 ld B,C ; 1 outi ; 5 out (C),E ; 4 ; pen 3 outi ; 5 out (C),A ; 4 ; pen 1 ld B,C ; 1 ; -- ; 64 microsecondsendm ld HL,(rstsave) ld (&0038),HL ei LD A,&45 ; from &40 to &49 with bdir/bc1=01 LD D,0 LD BC,&F782 ; PPI port A out /C out OUT (C),C LD BC,&F40E ; Select Ay reg 14 on ppi port A OUT (C),C LD BC,&F6C0 ; This value is an AY index (R14) OUT (C),C OUT (C),D ; Validate!! out (c),0 LD BC,&F792 ; PPI port A in/C out OUT (C),C DEC B OUT (C),A ; Send KbdLine on reg 14 AY through ppi port A LD B,&F4 ; Read ppi port A IN A,(C) ; e.g. AY R14 (AY port A) LD BC,&F782 ; PPI port A out / C out OUT (C),C DEC B ; Reset PPI Write OUT (C),D ; out (c),0 bit 7,A jp nz,newframe retrstsave: db 0,0colours: rept 200 defb &40,&43,&4b,&4a,&4c,&50,&52,&59,&5a,&48endm end start
The main problem is the keyboard. I use a french keyboard. In the emulator letters are good. But all others characters are bad. Numeric keys are mapped to Fx keys (F1, F2, ...). It's impossible to do most of special characters (", #, ...).
Minor bugs:when closing GFXViewer (click on cross), JavaCPC Desktop is closed (no error in the terminal).
Manage DSK can't open DSK created with JavaCPC (Disk not directoryable / readable).
Request:Is it possible to add a directive in assembler: incbin ?
define .myfile = "MYFILE.BIN"INCBIN .myfile
ifdef mylabel<asm code here>else<asm code there>endif
Page created in 0.085 seconds with 30 queries.