avatar_Phantomz

6128 PLUS Problem! Not sure what the problem is.

Started by Phantomz, 19:33, 12 October 17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bryce


dragon

Anyway you can  swap the fdd between the plus. Easy form.

Phantomz

Quote from: Bryce on 14:36, 18 October 17
Here: http://www.cpcwiki.eu/forum/applications/dsktest-v0-1b/

Bryce.

Thank you.  :)

Quote from: dragon on 14:41, 18 October 17
Anyway you can  swap the fdd between the plus. Easy form.

I'll try to get the drive sorted if I can, if not I'll swop the drive from the rev c to the rev a, at least I will have one fully working 6128 plus then. ;)

Phantomz

Well I swapped over the drive from the rec c to the rev a so the rev a is fully working ok.

I will look at the rec c drive later.

I'm still puzzled with why the R-type doesn't work on the rev c.  ???

I've ran another couple of memory tests, I think made by Gerald, they appear to be working ok, not getting anything red show up.  ???

There both here in cpr form incase they are wanted by anyone.  :)

Bryce

Quote from: Phantomz on 20:18, 18 October 17
Well I swapped over the drive from the rec c to the rev a so the rev a is fully working ok.

I will look at the rec c drive later.

I'm still puzzled with why the R-type doesn't work on the rev c.  ???

I've ran another couple of memory tests, I think made by Gerald, they appear to be working ok, not getting anything red show up.  ???

There both here in cpr form incase they are wanted by anyone.  :)
I think they only test the lower 64k, you need to test the upper 64k.

Bryce.

Gesendet von meinem Motorola DynaTAC 8000x mit Tapatalk


Phantomz

Quote from: Bryce on 20:45, 19 October 17
I think they only test the lower 64k, you need to test the upper 64k.

Bryce.

Gesendet von meinem Motorola DynaTAC 8000x mit Tapatalk

What's the best program / way to do this?

Thanks

Bryce

I think SyX's RAM test tests anything it can find.

Bryce.

Powered by SMFPacks Menu Editor Mod