- Top Stats

Top Posters Top Topic Starters Top Topics
Bryce 683
Audronic 226
CraigsBar 142
TFM 138
llopis 92
Audronic 34
Bignumbas 19
ComSoft612... 8
llopis 7
Querubin 6
X-Mass help please - 20019 Views 00WReX 15:29, 26 February 15
Fixing Floppy-Drives - 9752 Views Shining 00:45, 13 January 15
Interpreting u... - 8895 Views JonB 13:25, 05 April 15
CPC 464 blue s... - 7107 Views Alexandre ... 12:24, 29 July 15
Keyboard or Ma... - 5656 Views talrek 17:57, 21 October 14


Author Topic: Final report on 464 repairs  (Read 402 times)

0 Members and 1 Guest are viewing this topic.

Offline Bignumbas

  • CPC664
  • ***
  • Posts: 128
  • Country: au
  • If you break it you get to keep both halves.
  • Liked: 55
Final report on 464 repairs
« on: 08:54, 20 June 17 »
The 464 is now alive and well now that we solved the slow speed tape problem and minus a CLR key.


Parts replaced were:
3 x ram chips
IC110 Z80 CPU
IC108 6845  CRT
Tape drive belt
Tape idler tyre (modified O-ring used)
Tape counter drive belt (rubber band used for the moment).


This needed much less chips than the 6128 I recently did.
The ram was not getting hot either.


I do need either a clr key or a keyboard if anybody has one.
« Last Edit: 12:31, 20 June 17 by Bignumbas »
The cutting edge of technology is covered in blood!

Offline Audronic

  • 6128 Plus
  • ******
  • Posts: 1.167
  • Country: au
  • I know RST3 . I now know a little More.
  • Liked: 263
Re: Final report on 464 repairs
« Reply #1 on: 04:23, 13 November 18 »
Hi Mark


I have a SPARE  "CLR" Key here.
Do you still want one.


Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.