Buzzer for my Zaxon HxC

[Audronic]

Here it is:
http://www.sellmyretro.com/offer/details/16753

One more time, I have no issue with my GoTHXC 

Thanks for the link
Ray

[francouai]

Hello guys,

I finally received my Buzzer kit. (Buzzer + 5volts regul + resistor)

According from what I found on Internet about HXC + Buzzer install, I need to connect the resistor pin to the PIN 12 in the 26 pin header.
BUT
where is the pin 12??

If someone here can explain me where to connect the BUZZER pin and the +5 volt on this board, it will be great.

here it is my hxc:

[CraigsBar]

Psst, that is not an HxC. It is a gotek clone running the hxc firmware. The botched wiring on the bottom right of the pin header are pins 2, 4 and 6. So count up 6 pins from the bottom right... It's about halfway up on the right hand row of pins.

[francouai]

thanks for your reply

So, If I'm right, here it is :

[CraigsBar]

thanks for your reply

So, If I'm right, here it is :

No... 2 down from that. Include the pins under the horribly ugly solder blob.

[francouai]

here it is:

[CraigsBar]

here it is:

Yep, that's the one. [emoji2]

[francouai]

I'm all done with my buzzer install.
pretty cool stuff.

thanks!

[CraigsBar]

I'm all done with my buzzer install.
pretty cool stuff.

thanks!

How'd you do it.... And chance of a photo?

[Gryzor]

...and a recording

[CraigsBar]

@francouai please tell us how you achieved this. I'd love a buzzer in my 6128plus but I am too stupid to work it out! As I have the exact same gotek clone as you some details would be nice.

Sent from my m8 using Tapatalk