PCW with TV modulator A520?

[sucram]

Hello!

I know that the video output from the PCW should not direct connect with Scart...
Perhaps it is a stupid idea, but is it possible to use a Commodore Amiga TV modulator A520 with the PCW?
http://amiga.resource.cx/exp/a520

At retroisle I found this circuit diagram:
http://www.retroisle.com/amstrad/pcw/Technical/Hardware/pcwrfout.php


Best regards,
Marcus

[KaosOverride]

You just need to buffer the video signal to don't heat the ASIC


http://pulko.mandy.pagesperso-orange.fr/shinra/pcw.shtml


Then plug to an Scart composite video signal  (Or G from RGB) and you are done. The A520 is too much hardware for just buffering a signal...

[sucram]

http://pulko.mandy.pagesperso-orange.fr/shinra/pcw.shtml


You need the same buffering if you want to extract the video data from the expansion port.

Wich pins I have to use, if I want to extract the video signal from the expansion port?

[jevicac]

Circuit designed by our friend Habi Soft



https://www.youtube.com/watch?v=uUCi_0CVkmk

[Sebastian Blanco]

You can build this simple schematic designed by JonB
On this thread: http://www.vcfed.org/forum/showthread.php?55909-Amstrad-Schneider-PCW-IDE-drivers-an-interface/page2

I have done it and work very nice.
https://postimg.org/image/itb87pe7r/