avatar_Bignumbas

Can you hexedit the Parados rom to change parameters

Started by Bignumbas, 00:48, 28 February 17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bignumbas


I want to edit the Paradv2m.rom to make permanent changes to the parameters for the drives.
This rom has both drives set to Amstrads default cf2 drive parameters.
From my days hacking with a hex editor.....

It says in the pdos-ddb.xt file "To make a permanent change, change to ROM at address #1c00 (DDB) or #1c03 (DPB)."
I have Paradvm2.rom set to Amstrads default drive parameters.

What I find at 1c00 is "E5 21 10 00 39 7E FE 2E"
Shouldn't what I find be all 0's.
Where am I going wrong  :-\
The cutting edge of technology is covered in blood!

SOS

I've checked the original Parados 1.1 + 1.2 from the Parados/WinApe-Homepage, so it's the same problem.
Maybe the adresses are valid for the Parados 1.0-Version (or older).
So you must figure out the new adresses, or
maybe ask Executioner, if he can update the document.

Audronic

@Bignumbas


Parados Version 1.2 Modifications.

So that the Drive B defaults to 40 Track Single sided.
and then you can use Parados to make adjustments to the drive setup.
To make the "B" drive default to 40 Track Single sided.
Modify the byte at &3ffe  from &03 to &00 (drive B).
and alter the Checksum Byte at &3fff from &E5 to &E2

X-MEM, a new memory expansion for all CPC.

Look at Reply 659

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

Bignumbas

OK, thanks I will have another try tomorrow.
That's a completely different address.
The cutting edge of technology is covered in blood!

Powered by SMFPacks Menu Editor Mod