Difference between revisions of "C4CPC"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
m
Line 64: Line 64:
 
=== OSx ===
 
=== OSx ===
  
 +
==Cartridge Games==
 +
 +
For games that have been converted to cartridge format, see here: [[Converted_GX4000_games]]
 
== Further Discussion ==
 
== Further Discussion ==
 
[http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/cpc-plus-cartridge-replacement-one-more/ CPCWiki Forum discussion thread]
 
[http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/cpc-plus-cartridge-replacement-one-more/ CPCWiki Forum discussion thread]

Revision as of 12:59, 17 May 2015

C4CPC is a cartridge replacement for the Amstrad Plus range and the GX4000.

Using a micro-SD card storing cartridge images it also allows direct loading of the cartridge from a PC (Windows/Linux/OSX) through USB.

C4CPC GX4000 2.jpg

Features

  • Direct access to 16 cartridges selected by dip switches. Cartridge can be up to 512kB
  • Access to unlimited number of cartridge images using the provided selector cartridge
  • Direct cartridge loading from host computer using USB
  • Cartridge file can be in standard .cpr format or raw binary .bin
  • Integrated ACID

Using C4CPC on a GX4000 with the original Amstrad power supply may cause damage to the GX4000 please read this forum thread

User guide

Quick start

  • Power off you Amstrad Plus / GX4000
  • Insert the C4Cpc cart with a prepared SD in the cartridge slot, DIP switch facing up on 464/6128, DIP on joystick port side on GX4000
  • Select your favourite cart slot on the DIP switch
  • Power on ...
  • et voilà !

Cartridge selector

C4CPC CprSelect.png

CprSelect is a special cartridge that allows browsing the SD cart for cartridges to load. The main area displays the current folder contents. Browsing is done using either one of the joysticks or the keyboard. Keyboard controls : cursors for browsing, space/enter/copy to select and esc to return to parent folder Joystick controls : left/right/up/down for browsing, fire 1 to select, fire 2 to return to parent folder

Left/Right jump from page to page if the folder cannot be displayed in one screen.

SD card preparation

The C4CPC is delivered with a prepared microSD card which contains the Basic Cartridge in slot 0 and the cartridge selector in slot 15. Using your computer, cartridge images can be added to any slots or cartridge selector by writing to the SD card.

The SD must contains at least the following folder tree

  • _C4CPC : This is the main folder that contains the dip switch selectable folder.
  • _C4CPC/0 to _C4CPC/F folders, which should contain only one valid CPR/BIN file. The cartridge emulator will first look for a CPR then a BIN file and load it to the cartridge.

How it works

At power up, CPC/USB whichever is the first, the uC will check for a valid .CPR/.BIN file to load.

  • If the file is smaller than 160KB, it will be loaded directly
  • If no file is available or bigger than 160KB, a bootloader is 1st loaded. The bootloader will then load the cart if any.

Note that C4CPC is powered either by the CPC or the USB port. That means that power cycling the CPC will NOT initiate a new cart loading if the cart is also powered by USB.

From SD card

Just select your cartridge slot and power your CPC

From USB

A connected cart should appear as a serial port (COMx on windows, /dev/ttyACMx on linux, /dev/tty.modemxxxx on OSX). Windows require a .inf file to install the proper drivers. Loading is done using a python3 script which has the following syntax :

C4CpcCom.py -p port -c cart.cpr

where port is the serial port assigned to the cart.

Firmware upgrade

Windows

Linux

OSx

Cartridge Games

For games that have been converted to cartridge format, see here: Converted_GX4000_games

Further Discussion

CPCWiki Forum discussion thread