Difference between revisions of "Monitor compatible"
From CPCWiki - THE Amstrad CPC encyclopedia!
m |
m (Atari ST) |
||
| (4 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | The following computers can be connected to the usual Amstrad [[CTM640/CTM644| CTM644]] (or the unusual CTM640/CM14) monitors: | |
| − | + | *[[Tatung Einstein]] (through resistors to lower the R-G-B signals' voltage; pins must be reasigned; and horizontal focus position must be realigned) | |
| − | + | ||
| − | *Tatung Einstein (through resistors to lower the R-G-B signals' voltage; pins must be reasigned; and horizontal focus position must be realigned) | + | |
*BBC Model B (may need resistors? I think the signal is too much strong, but it seems to work ok...) | *BBC Model B (may need resistors? I think the signal is too much strong, but it seems to work ok...) | ||
*BBC Master (may need resistors? I think the signal is too much strong, but it seems to work ok... | *BBC Master (may need resistors? I think the signal is too much strong, but it seems to work ok... | ||
| Line 16: | Line 14: | ||
*Exeltel Exelvision (pins must be reassigned) | *Exeltel Exelvision (pins must be reassigned) | ||
*Amiga range computers | *Amiga range computers | ||
| + | *Atari ST computer range (with adaptor cable) | ||
As a general rule, you will be able to connect computers with RGB video output *and composite sync*. | As a general rule, you will be able to connect computers with RGB video output *and composite sync*. | ||
| Line 29: | Line 28: | ||
*French CBS Colecovision with SCART output | *French CBS Colecovision with SCART output | ||
*French Atari 7800 with SCART output | *French Atari 7800 with SCART output | ||
| − | + | ||
| + | A classical way to get other computers running on a CPC monitor is to use the scart/Peritel port from a [[MP-3]] TV tuner. | ||
| + | |||
| + | Amstrad's CPC monitors were basically cheap TV screens lacking the tuner... So any machine able to run on a TV could be used on those. | ||
| + | |||
| + | [[Category:Peripherals]][[Category:Amstrad Products]][[Category: Non CPC Computers]] | ||
Latest revision as of 14:43, 29 December 2014
The following computers can be connected to the usual Amstrad CTM644 (or the unusual CTM640/CM14) monitors:
- Tatung Einstein (through resistors to lower the R-G-B signals' voltage; pins must be reasigned; and horizontal focus position must be realigned)
- BBC Model B (may need resistors? I think the signal is too much strong, but it seems to work ok...)
- BBC Master (may need resistors? I think the signal is too much strong, but it seems to work ok...
- Spectrum +3 (through resistors to lower the R-G-B signals' voltage; pins must be reassigned)
- Spectrum +2A (through resistors to lower the R-G-B signals' voltage; pins must be reassigned)
- Sinclair QL (through resistors to lower the R-G-B signals' voltage; pins must be reassigned)
- RFT Kc-compact (pins must be reassigned)
- Patisonic Aleste 520EX (pins must be reassigned)
- Camputers Lynx 48k (pins must be reassigned, and horizontal focus position must be realigned)
- Oric 48k/Atmos (pins must be reassigned)
- Enterprise 64/128 (pins must be reassigned, and R-G-B brightness must be re-set for each colour)
- Exeltel Exelvision (pins must be reassigned)
- Amiga range computers
- Atari ST computer range (with adaptor cable)
As a general rule, you will be able to connect computers with RGB video output *and composite sync*. Therefore, it is possible that the following computers can be connected to an Amstrad monitor:
- Thomson MO5 (probably)
- Didaktik M48
- Radofin Aquarius with SCART connector (french Aquarius)
- MGT Sam Coupé (probably)
- MSX Computers (probably)
- French Sega SC-3000x computers
- Acorn Electron
- French Mattel Intellivision with SCART output
- French CBS Colecovision with SCART output
- French Atari 7800 with SCART output
A classical way to get other computers running on a CPC monitor is to use the scart/Peritel port from a MP-3 TV tuner.
Amstrad's CPC monitors were basically cheap TV screens lacking the tuner... So any machine able to run on a TV could be used on those.
