SYMBiFACE II

From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 14:11, 12 October 2009 by Nowster (Talk | contribs) (Spelling and grammar)

Jump to: navigation, search

Introduction

Prototype of the CPC-IDE interface

In Autumn 2004 the CPC-IDE was developed by Dr.Zed with support from Octoate, Tolkin and TFM. It was the first hardware solution ever that allowed connection of IDE harddrives and CF cards to the CPC with the maximum possible data transfer speed. Technically the CPC-IDE interface was based on the GIDE IDE interface by Tilmann Reh.

It was fully working, but still in a prototype state, so only 10 pieces have been produced.

During the production of the CPC-IDE Prodatron joined the team and created IDE-support in SymbOS for FAT16 and FAT32 hard discs by Xmas 2004.

After getting it working successfully, Dr.Zed and Prodatron made plans for a second version, which includes a lot of more extensions. So the SYMBiFACE II is not now merely an IDE interface. It merges the CPC with current PC technology.

Features

SYMBiFACE II
SYMBiFACE II with description

CPC SYMBiFACE II contains the optimal solution for connecting a CPC with an IDE hard disc. It provides the maximum - both for the performance and for the simplicity in accessing the hard disc.

IDE Features

  • Supports IDE hard discs with up to 128GB.
  • Bigger HDD or CD/DVD drive support possible with drivers.
  • Simultaneous operation of two hard discs (master and slave) for a total of up to 256GB on your CPC!
  • Transfer speed of 162KByte/s. That's as fast as copying memory inside the CPC with LDIR. In practice (loading FAT16/32 files) the speed is still about 130KB/s (SymbOS-FAT-driver).
  • External power supply required: no extra load for the CPC's internal PSU.
  • No timing problems: Interrupts don't need to be disabled during the data transfer with the hard disc. The hard disc can operate while you play sound or doing other things with your CPC (multitasking etc.).
  • Traffic activity display via a LED on the board.

Additional Features

  • 512KB RAM extension, which is fully compatible with the CPC 6128 and the dk'tronics RAM extension
  • 512KB rewriteable ROM. You can upload up to 32 ROMs, which are persistent. You can also use the ROM space as an additional RAM extension. ROMs can be switched on or off via switches or via software.
  • PS/2 mouse connector. This makes it possible to connect wireless and optical mice to your CPC.
  • Real time clock, which is fully PC compatible and provides additional 128 byte persistent RAM, which can be used to store config data.

ROM-Manager

SYMBiFACE II ROM manager

SYMBiFACE II includes ROM manager software, which runs under SymbOS. This tool is needed for displaying, loading, saving and deleting the 32 x 16K ROMs.

  • See also "ROManager", a comprehensive SYMBiFACE II ROM management tool for FutureOS. It allows you to load or save one or all ROMs, test a ROM, adapt the checksum, copy, paste and delete ROMs etc.

See also