Schneiderware

From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 09:05, 21 September 2010 by Nocash (Talk | contribs) (I/O Ports)

Jump to: navigation, search

The Schneiderware series consists of several DIY projects which have been released in german magazine CPC Schneider International published by DMV. The name "Schneiderware" was probably choosen due to its double meaning ("CPC Hardware" in computer language, or "specially fitted clothing" in german language). Aside from building the hardware on one's own, one could also order printed circuit boards, either fully assembled, or in kit form.

The various boards are having special connectors, intended to be mounted on the "Basisplatine" (some kind of a motherboard) which allows to connect up to five Schneiderware boards to the CPCs Expansion Port; with some small modifications one could also connect the boards directly to the Expansion Port (the motherboard is merely an Y-cable-like adaptor without electrical components, so one doesn't really need it).

The DIY projects can be reportedly found in following issues (as by now, the magazine pages don't seem to be scanned, so details about I/O ports are unknown):

Notes: The "Centronics" board is yet another 8bit Printer Port solution (but different than the joystick-signal based one that was released a few months earlier in the same magazine). The Real Time Clock is somewhat similar to the CPCI Real Time Clock released in a special issue of the same magazine, but not identical (the RTC chip has different pin-outs, and some of it's 4bit registers are working slightly different, the leap-year bits, for example).

I/O Ports

Address (default) Address (alternate) Usage
F8E0h F8F0h Schneiderware Centronics 8255 PPI Port A (data)
F8E1h F8F1h Schneiderware Centronics 8255 PPI Port B (unused)
F8E2h F8F2h Schneiderware Centronics 8255 PPI Port C (busy/strobe=
(bit7=busy, bit6-1=unused, bit0=strobe; strobe is externally inverted)
F8E3h F8F3h Schneiderware Centronics 8255 PPI Control
F9E0h F9E2h Schneiderware V/24 8251 USART Data
F9E1h F9E3h Schneiderware V/24 8251 USART Control
F9ECh F9E8h Schneiderware V/24 8253 Timer 0 (TX clock)
F9EDh F9E9h Schneiderware V/24 8253 Timer 1 (RX clock)
F9EEh F9EAh Schneiderware V/24 8253 Timer 2 (unused)
F9EFh F9EBh Schneiderware V/24 8253 Timer Control
Note: Timer clock input is jumper select-able: 2MHz (default), or 1MHz

Pictures

Datasheets