Difference between revisions of "V9990"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Created page with "* Palette index 0 has a mask of &9F (bits for r,g,b and color key), other indices have a mask of 0x01f for just r,g,b. * If you read from a write-only register you will see da...") |
|||
| Line 1: | Line 1: | ||
| + | * Reading from the Kanji ROM ports without a Kanji ROM returns databus values | ||
* Palette index 0 has a mask of &9F (bits for r,g,b and color key), other indices have a mask of 0x01f for just r,g,b. | * Palette index 0 has a mask of &9F (bits for r,g,b and color key), other indices have a mask of 0x01f for just r,g,b. | ||
| + | * If a command wants data written to the command port, you can't use a read, this will not clear the data request. | ||
* If you read from a write-only register you will see data-bus value because the V9990 doesn't assert data on the bus. | * If you read from a write-only register you will see data-bus value because the V9990 doesn't assert data on the bus. | ||
* Some registers have additional bits which are not documented. The mask describes which bits are read/write and which are unchanged. | * Some registers have additional bits which are not documented. The mask describes which bits are read/write and which are unchanged. | ||
Where the mask has a '1' bit, this bit is read/write. Where the mask has a '0' bit this bit remains at 0 and can't be changed. | Where the mask has a '1' bit, this bit is read/write. Where the mask has a '0' bit this bit remains at 0 and can't be changed. | ||
| − | + | - Register 9 (INTERRUPT READ/WRITE): Mask is &87 | |
| − | - Register 9: Mask is &87 | + | - Register 15 (BACK DROP COLOR): Mask is &FF |
| − | - Register 15: Mask is &FF | + | - Register 22 (SCROLL CONTROL): Mask is &C1 |
| − | - Register 22: Mask is &C1 | + | - Register 25 (SPRITE PATTERN GENERATOR TABLE BASE ADDRESS): Mask is &CF |
| − | - Register 25: Mask is &CF | + | - Register 26 (LCD CONTROL): Mask is &FF |
| − | - Register 27: Mask is &FF | + | - Register 27 (PRIORITY CONTROL): Mask is &FF |
Revision as of 09:48, 6 October 2018
- Reading from the Kanji ROM ports without a Kanji ROM returns databus values
- Palette index 0 has a mask of &9F (bits for r,g,b and color key), other indices have a mask of 0x01f for just r,g,b.
- If a command wants data written to the command port, you can't use a read, this will not clear the data request.
- If you read from a write-only register you will see data-bus value because the V9990 doesn't assert data on the bus.
- Some registers have additional bits which are not documented. The mask describes which bits are read/write and which are unchanged.
Where the mask has a '1' bit, this bit is read/write. Where the mask has a '0' bit this bit remains at 0 and can't be changed.
- Register 9 (INTERRUPT READ/WRITE): Mask is &87 - Register 15 (BACK DROP COLOR): Mask is &FF - Register 22 (SCROLL CONTROL): Mask is &C1 - Register 25 (SPRITE PATTERN GENERATOR TABLE BASE ADDRESS): Mask is &CF - Register 26 (LCD CONTROL): Mask is &FF - Register 27 (PRIORITY CONTROL): Mask is &FF
