Printed Amstrad Addict magazine announced, check it out here!
Started by Bryce, 13:34, 08 June 12
0 Members and 1 Guest are viewing this topic.
Quote from: BiNMaN on 17:22, 08 June 12there was one recently for sale on ebay from Ireland, only one bid went on it (I was tempted) nice peice of kit you've got there
Quote from: Gryzor on 19:56, 08 June 12 You lucky b@st@rd.
Quote from: Bryce on 12:54, 09 June 12The only sensible place at the moment seems to be in the middle between the cartridge slot and the tapedeck with the slot for the floppy at the rear. There's not enough space under the tapedeck or the keyboard, so there's nowhere else (internally) available.
Quote from: Bryce on 14:25, 09 June 12You mean just "glued" on top??
Quote from: Badstarr on 22:47, 08 June 12I'm not sure about how I intend to deal with the cassette unit as I'm quite keen on having a sawn off 464 case but I'm undecided right now.
Quote from: ralferoo on 07:47, 13 June 12Heh, I'm considering doing the very same thing to use with my FPGA project. I even have a 464 with a completely destroyed motherboard thanks to an over-enthusiastic modder as its previous owner... (best part of the story is he claimed it was working before he put it into storage, so obviously it's the storage elves that can't be trusted!)
Quote from: MacDeath on 20:15, 13 June 12What about adding a counter on the tape driver?
Quote from: MacDeath on 20:15, 13 June 12also I've heard the 464PLUS' tape driver is not connected to the sound output so you can't hear the bit flow, nor audio tapes while playing...
Page created in 0.218 seconds with 24 queries.