Started by Amstari, 15:55, 30 July 10
0 Members and 1 Guest are viewing this topic.
Quote from: Bryce on 16:00, 30 July 10Yeah, no problem. The 12V is only for the Disk, the rest works perfectly with just the 5V supply.Bryce.
Quote from: Bryce on 00:09, 23 August 10Hi Z80A, The 12V supply only powered the disk drive motors, it definitely shouldn't have any effect on the tape-in or stereo ouput, it's not even connected to the main PCB. However, the stereo ouput is a line-out signal, so if the speakers you connected were passive (ie: no amplifier), then it would be rather quiet, as the signal strength is well below what a speaker requires. As far as the mp3 player is concerned, experiment with the volume control on the mp3 player and you should find a volume that wont give you read errors, it won't necessarily be the same volume that worked using the cassete adapter.Bryce.
Quote from: Bryce on 15:07, 23 August 10Maybe it's too loud? Try lower volumes perhaps?Bryce.
Page created in 0.052 seconds with 33 queries.