Front-end for M4 board in ROM

Started by abalore, 21:08, 20 December 18

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

VincentGR

Nice, never tried to see if you can upload roms direct from the card, always used the web interface.


Here is an example:


10 |NETSET,"NAME=CPC6128, SSID=YOURSSID, PW=YOURPASS, DHCP=0, IP=IPOFYOURCPC, GW=YOURROUTERIP, NM=255.255.255.0 DNS=YOUROUTERORDNS, DNS2=THESAME"


SAVE "AUTOEXEC.BAS"

GUNHED

Quote from: VincentGR on 14:41, 14 February 19
Nice, never tried to see if you can upload roms direct from the card, always used the web interface.


Well, I can confirm that ROM upload works since the FutureOS Installer works from disc and SD-card.  :)
http://futureos.de --> Get the revolutionary FutureOS (Update: 2022.03.09)
http://futureos.cpc-live.com/files/LambdaSpeak_RSX_by_TFM.zip --> Get the RSX-ROM for LambdaSpeak :-) (Updated: 2021.12.26)

VincentGR

I also used the |FCP command with * for complete disk copy and file by file.
Most of the times the disk I make is empty although KB are reduced and cat gives me nothing.
With |ls I can see the files on the disk (3" drive and 3.5) but when I try to run something it says file not found.


Any ideas?

VincentGR

Quote from: VincentGR on 18:41, 14 February 19
I also used the |FCP command with * for complete disk copy and file by file.
Most of the times the disk I make is empty although KB are reduced and cat gives me nothing.
With |ls I can see the files on the disk (3" drive and 3.5) but when I try to run something it says file not found.


Any ideas?


Oooopsss, I though I was on M4 thread.
I'll re post it there.

Duke

Quote from: VincentGR on 14:41, 14 February 19
Here is an example:


10 |NETSET,"NAME=CPC6128, SSID=YOURSSID, PW=YOURPASS, DHCP=0, IP=IPOFYOURCPC, GW=YOURROUTERIP, NM=255.255.255.0 DNS=YOUROUTERORDNS, DNS2=THESAME"


SAVE "AUTOEXEC.BAS"


Please do not save netsetup as AUTOEXEC.BAS - Once you run |NETSET, the configuration is saved to the microSD and automatically re-loaded on next powercycle. ;)
Sorry for OFFTOPIC!

CraigsBar

Oh wow, how did I miss this notification. Well I saw it now and this rom is amazing. Thank you so much.

Sent from my ONEPLUS 3t using Tapatalk

IRC:  #Retro4All on Freenode

francouai

abalore> no more update with nice functions for your very nice software?  8) ;D
--
francois

GUNHED

BTW: The ROM-name contains two &0A bytes, this confuses some ROM managing software. Would be great it this great ROM could be made compatible (by removing the two control codes).  :)
http://futureos.de --> Get the revolutionary FutureOS (Update: 2022.03.09)
http://futureos.cpc-live.com/files/LambdaSpeak_RSX_by_TFM.zip --> Get the RSX-ROM for LambdaSpeak :-) (Updated: 2021.12.26)

abalore

Quote from: GUNHED on 00:24, 27 March 19
BTW: The ROM-name contains two &0A bytes, this confuses some ROM managing software. Would be great it this great ROM could be made compatible (by removing the two control codes).  :)


Could you please test this ROM I'm attaching here and tell me if it solves the compatibility issues?




GUNHED

Quote from: abalore on 13:11, 27 March 19

Could you please test this ROM I'm attaching here and tell me if it solves the compatibility issues?


Very well! Excellent! Thanks a lot.  :)
http://futureos.de --> Get the revolutionary FutureOS (Update: 2022.03.09)
http://futureos.cpc-live.com/files/LambdaSpeak_RSX_by_TFM.zip --> Get the RSX-ROM for LambdaSpeak :-) (Updated: 2021.12.26)

abalore

Here is the latest version with compatibility improvements.




breiztiger


hi


can we have info to what track number it write when use DSK to disc, like (T:00) after "TRansfering DSK to Disc"


and can you tell if we want another copy after write success ?


how can i set permanently format and verify at Yes ? (poke the rom but where ?)


thanks in advance

shifters74

Hi,
this is truely an awesome rom to go with the m4!!
many thanks for the development of it!
shifters

Livingstone

Abalore, it would be very difficult for the program to transfer from 3" to DSK?

abalore

Quote from: Livingstone on 10:49, 22 August 19
Abalore, it would be very difficult for the program to transfer from 3" to DSK?


I can't say right now, it's something that needs to be investigated, but for sure it won't be easy.

Livingstone

#90
Ok

Dominoid

I've been setting up my M4 board this evening and this software is bloody great! Thank you Abalore

Swainy

#92
Guys, sorry to be a pain but I've got a 6128 and I just want to check what roms I need to get this front end going. Ive got M4FEv202 & Lower6128_mod is that right? What is the M4 rom?
Retro Asylum

VincentGR

You just need to enable M4 rom.


This is how it works for me:




Swainy

Cool, all sorted! Thanks
Retro Asylum

Swainy

Guys, I've got another problem. Once I'm powering down, my M4 board doesn't remember my wifi settings? What am I doing wrong?
Retro Asylum

VincentGR

Strange, it remembers the settings with the netset command  :-X

Swainy

#97
It's also comes up with an error when I used the |M4FE command unless I set up the wifi each time.


I can only assume that one of the rims that I'm using is wrong. Where are you guys grabbing the M4 rom?
Retro Asylum

Maniac

The WiFi settings are stored on the SD card. If you don't have one installed or it's switched to read only it won't be able to save the settings.

Swainy

#99
I think that my M4 board has a loose connection on the SD card slot. I've just played about with it and it seems to be working again. Very odd.


One thing I have noticed is that next to the dir.txt file it says ERR.



Retro Asylum

Powered by SMFPacks Menu Editor Mod