News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu

Green Monitor GT65 black level

Started by retro space, 20:06, 10 June 24

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

retro space

I got a Green Monitor GT65 last weekend, and I was wondering if it is possible to tweak the black level. It seems you can't make the background black without reducing the overal brightness seriously. Is there a fix for this?
Teaching computer science on a high school with the CPC, P2000T, Spectrum and C64.

Gryzor

It's aaaall green, all the way down. Even when turned off, it's still green :D

Benedikt

Quote from: retro space on 20:06, 10 June 24I got a Green Monitor GT65 last weekend, and I was wondering if it is possible to tweak the black level. It seems you can't make the background black without reducing the overal brightness seriously. Is there a fix for this?
I see no obvious way. You have to turn the brightness all the way down and the contrast all the way up.

Other than that, you could play with the resistors surrounding the contrast potentiometer, provided that you know how to work with CRTs.

Alternatively, you could try to build an external amplifier, perhaps with a diode to lower the black level of the amplifier output.

ZorrO

#3
There are these little yellow knobs inside the monitor, and one of them increases the contrast more than the outside one.
Just be careful because you have to play with it when it is turned on and open.
CPC+PSX 4ever

dodogildo

You better don't open the case. not worth the risk.
M'enfin!

SerErris

I am sure you changed the background color from blue to black (and the border color), right? 
Just asking because I wondered as well and after setting it to black (and white font color) it was much better...
Proud owner of 2 Schneider CPC 464, 1 Schneider CPC 6128, GT65 and lots of books
Still learning all the details on how things work.

abalore

You can do this: Get a CPC to RGB scart cable, then change it to connect the LUM (pin 6) to GREEN on the SCART, and leave blue and red unconnected. I tried this and you get the true 16 level green screen and a good, deep black.

Also you can try other combinations to get other monochrome screens with red, yellow, etc...

(of course this is with a scart color TV)

McArti0

Quote from: abalore on 16:04, 14 June 24you get the true 16 level green screen and a good, deep black.
27 levels !   8) .  
CPC 6128, Whole 6128 and Only 6128, with .....
NewPAL v3 for use all 128kB RAM by CRTC as VRAM
TYPICAL :) TV Funai 22FL532/10 with VGA-RGB-in.

abalore

Quote from: McArti0 on 18:44, 14 June 24
Quote from: abalore on 16:04, 14 June 24you get the true 16 level green screen and a good, deep black.
27 levels !  8)
Well, 16 simultaneous

retro space

Quote from: SerErris on 15:21, 14 June 24I am sure you changed the background color from blue to black (and the border color), right?
Just asking because I wondered as well and after setting it to black (and white font color) it was much better...

Yes, I tried playing some games that have black background.
Teaching computer science on a high school with the CPC, P2000T, Spectrum and C64.

VincentGR

Is there a deep black on Amstrad monitors?
Even when they're off, they are light gray  ;D

Bryce

Quote from: VincentGR on 21:51, 16 June 24Is there a deep black on Amstrad monitors?
Even when they're off, they are light gray  ;D

I'm holding out until Amstrad release the CPC OLED edition. :)

Bryce.

Powered by SMFPacks Menu Editor Mod