Hi All,
I've modified my 464+ to upgrade it to 6128+ specification, I want to install an internal Gotek HXC with a small LED screen as a modification, does anyone have any good suggestions on where to cut the case to install the screen and buttons. I would ideally like the screen visible when sitting in front of the keyboard, the side where the floppy drive is place on the 6128+ would be a good place but obviously that is not visible without craning round to look at it.
Maybe I could make a reversible modification which doesn't involve cutting the case? Cheers all any advice and recommendations welcomed.
Trevor
Yes don't cut anything. You will regret it later. Zaxxon Piotr offers a gotek drive with display afaik.
Quote from: LambdaMikel on 20:37, 26 June 18
Yes don't cut anything. You will regret it later. Zaxxon Piotr offers a gotek drive with display afaik.
Thanks LambdaMikel, Yeah I'm thinking of trying to minimise cuts to the bodywork but on the otherhand I don't especially want lots of devices hanging off it, whatever I do it need to be tidy. I had to cut the case to fit the external fdd Centronics port but I think that is an acceptable cut to upgrade the machine.