Started by Trotzdem, 03:14, 10 December 09
0 Members and 1 Guest are viewing this topic.
Quote from: Muzer on 21:03, 21 December 09EDIT: When fiddling, a brass-looking pin fell out from god knows where. Where is this from, and would it matter if it doesn't go back?
Quote from: Trotzdem on 04:46, 22 December 09Could you tell which drive you own ? It's code is probably on a sticker and begins with "EME".The pin is very probably responsible for detecting wether a disc is write protected or not. Sadly, I don't own such a drive, so I can't do any photos to show you where the pin has to be. But is very likely you find some kind of microswitch on the circuitboard of the drive. The pin would be located above that, so it would press it when a disc is inserted.Perhaps you can make a photo of the circuitboard of your drive, the drives body and the pin ?
Quote from: rpalmer on 10:35, 07 January 11Does the program CPCTapeXP v1.1 able to transfer it to disk?The other option is create a WAV file from an audio editor and then play this via WinAPE and snap shot memory to the PC disk. Note a custom loader would likely need to be created to re-load the image.I have been able to transfer programs via WinAPE (albeit simple basic, but may be it can handle speedlocked or others protections directly).
Quote from: Gryzor on 13:48, 13 April 11Let's resurrect this...My belts arrived yesterday and I'm ready to replace one after several years. What I don't remember is - where is the write-enable pin located, and what should you take care of in order for it not to fall off? Unfortunately there are no hints either here or in the wiki article (after doing mine I'll update both guides and incorporate them somehow)...
Quote from: Trotzdem on 03:14, 10 December 09In order to remove it completely as I did, you have to take out 2 plugs which are in the white sockets of the upper right corner in the picture.
Page created in 0.111 seconds with 51 queries.