News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu

Multiface 2 boards

Started by pjrodriguez, 08:26, 08 January 18

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kik3is

As always I'm late :(, by chance is not there any left over? ;)

kik3is

Quote from: talrek on 20:54, 31 January 18
The 10 boards have their future owners, but if anyone changes his mind, you'll be the next.
If there is enough persons interrested for 10 other boards i'll do it.


Price will be the same : 30€ (the MF2 with MotherX4 connector) and 6€ for extra cable (Edge or Centronics)
I am interested in a board :)

let's see if we reach ten

talrek

#27
OK let's start a new list (if you want additional cable just tell me Centronics or/and Edge)


       
  • kik3is x1                        Interface sent
  • adolfo.pa x1                  Interface sent
  • Jomicamp x1                  Interface sent
  • Kaosoverride x1           
    Interface sent
  • Vyper68 x1                   [/size]
    Interface sent
                 
  • Outsde x1                   [/size]
    Interface sent
  • GOB                             [/size]
    Interface sent
  • Defcon                         Paid

adolfo.pa

One for me too. Thanks!

jomicamp

Please, add me to the list!

KaosOverride

A new batch?? Add me please! x1  :D
KaosOverride · GitHub
MEGA Amstrad Public Amstrad folder

blackdalek

I thought I posted weeks ago that I received my MF2 board, but I can't find anywhere that I posted such.
So, if I haven't told you already, thank you @talrek I have my MF2 board.
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

kik3is

#32
Come on, come on, this is good hardware for Amstrad guys !!! ;D

Vyper68

Hi,
I would like to be put on the list for the MF2 please. I have sorted out the problems i had before, so i would like to get one if possible please.
Just one with an edge connector please.
Paul Woakes - Genius & Programmer

Thank you for Mercenary Paul

talrek

Hi,
ok one added  :)
I wait until all the mouse interfaces are sent to order the parts for the MF2 new batch.

;)

Vyper68

Thanks Talrek, looking forward to getting this  :)
Paul Woakes - Genius & Programmer

Thank you for Mercenary Paul

talrek

Components ordered, everything should be available in less than one month  :)






kik3is

Thank you, we wait for your news to pay

Enviado desde mi Redmi Note 3 mediante Tapatalk


talrek

Hi, i almost ficnished, i'm still waiting for one sort of component to finished them all.Until that, i managed to finish three interfaces with the components i had in stock.
So i sent an email for the firsts three lucky guys !!!  :laugh:

GOB

I arrive a little after the battle but I will be interested for a multiface II for CPC +

kik3is

Welcome to home [emoji23], Thanks @talrek

Enviado desde mi Redmi Note 3 mediante Tapatalk


talrek

Hi !Great ! good news !!!!  ;D
BTW i have 5 other interfaces if someone is still interested  :laugh:

defcon

i'm interested, i want to buy one , add me to the list

talrek


Quote from: defcon on 11:19, 30 May 18
i'm interested, i want to buy one , add me to the list
Thank you the interface will be sent monday.


Only 2 remaining.

SpaceRat

Sorry about the silly question, but do I need a MotherX4 to use the MF2-clone or will it work without it when using a proper cable?


I'm not up to date about the latest hardware for the CPC and I have no single clue what the MX4 is for nor what the expansions for it do.


Either way, I would be interested in an MF2-clone.


pelrun

The MotherX4 is just a passive bus expander; there's no difference between plugging a board into it and plugging it directly into the expansion port (except for the diode drop on the 5v line.)


No board requires it, unless you want to run more than one board simultaneously.

SpaceRat

Can one still buy the Mother X4 board somewhere?
Or at least parts to make an own one ...


pelrun

@TotO makes them; he no longer posts here or has a web presence but afaik he still responds to PM's.

MikeSDK

Boarding the train here if there's still something left - I would like the chance to own one of these as well :)

- Mike

LambdaMikel

Quote from: MikeSDK on 13:18, 28 June 18
Boarding the train here if there's still something left - I would like the chance to own one of these as well :)

- Mike
Unlike others, I don't think ToTo has shared any gerbers of his boards.
But there are plenty of Mother X4 alternatives available these days.

Powered by SMFPacks Menu Editor Mod