Started by revaldinho, 00:10, 25 April 18
0 Members and 1 Guest are viewing this topic.
Quote from: aerobaticant on 11:25, 25 May 22Hi @revaldinho, and everyone. I have succesfully created a DIY version of the universal RAM expansion board on prototype PAD board! I changed the JTAG header to be a single in-line pin strip as this it what I have used on other projects using Xilinx devices.I used an XC9536-15PC44 as I have a few lying around. Looking at the code, and using a 55ns SRAM, I couldn't see a reason why this shouldn't work, unless I've overlooked something important.
Quote from: aerobaticant on 11:25, 25 May 22Any suggestions of some good (6128?) games to try?
Quote from: Rabs55 on 19:39, 26 May 22Hi, @revaldinho , just to say thanks again for the 512k old school ram expansion pack project. It worked and I now have a fully functioning 512k ram expansion.Learnt a lot along the way.Any recommendations on what next to try?
Quote from: netmercer on 01:01, 25 November 22Hi,I'd like to buy a Universal CPC 512K RAM Card (the version with CPLD XC9536), which was developed by revaldinho.Either a bare PCB or a complet card would be fine, regardless of which. Perhaps someone wants to sell such a device.Best regards from Germanynetmercer
Quote from: Rabs on 13:17, 21 July 22Finally worked out how to upload images. Here is my trio of cards, the CPC-CPLINK (and just look at the size of the PI model B on the back), the Eightrom card and Old School 512k RAM expansion. All working.I highly recommend these projects to anybody thinking about building them, the information and support is excellent. I have very little prior experience and found the projects challenging but fun and I have learnt so much along the way.You cannot view this attachment.
QuoteXC9536-15PC44 should be fine. All the speed grades for the XC9500s should work with all my projects
Page created in 0.079 seconds with 27 queries.