Started by Pentagon, 13:56, 07 July 10
0 Members and 1 Guest are viewing this topic.
Quote from: Pentagon on 14:51, 07 July 10Maybe Devilmarkus can help me to make this thread sticky and to add to wiki.
QuoteHowever, I will have to edit or leave out the pictures with C64 literature in the background, the patented "Wiki C64 filter" would probably recognise and block these images
Quote from: Pentagon on 13:56, 07 July 10are you sad? Your 3 inch Disc Drives are not working safe. Replacing the Belt annoying you? Mechanics is old and faulty?#
Quote from: Pentagon on 19:27, 07 July 10hehehe, me too. But really to be honest, from my 12 drives just 4 are in full working condition. So that's the reason why i wrote that questions. Now i like to see your Plus Modded with a HxC please?Kindly RegardsTom
Quote from: Pentagon on 23:51, 07 July 10i will flash my Inicron now with Future OS 7 or should i use the Beta 8 version? Then i check the copy disc routines. I doubt that it will work together cause of your changed timings. But we will see if you used fixed timings it might be working if you use variabel timings then not.Do you like screenshots too?
Quote from: Pentagon on 00:47, 08 July 10I am having a serious problem at the moment. If i connect my B: Drive to the CPC with internal SD HxC the B: Drive is not working. I just get a read fail. At the other CPC its working fine.
Quote from: Pentagon on 01:19, 08 July 10Thank you for your help, that was also my first intension and now i put out the HxC from A: port and did an Chinon FZ354 inside. Et voila, my B: Drive is working again. So i am sure that my crimped adapter cable is working fine. I jumpered the HxC Floppy emulator as described in the tutorial. Its jumpered to A: and from my cable its DS:0 - so i think there must be an issue with it.Strange, cause when i plug it as B: drive its working fine with both drives. Dont know what i should do know. My soldering and crimping is done correct, thats most important.Maybe i can use the HxC just as B: Drive and use an ABBA Switch to make it A:? That would be really a pity cause i like to have it internal as A: and together with my 80 tracks Parados drive. grmmmpf.RegardsTom
QuoteSo, how much for you to do it for me if I send you my machines?
Page created in 0.158 seconds with 50 queries.