Started by ikonsgr, 11:39, 24 March 23
0 Members and 1 Guest are viewing this topic.
Quote from: JankyComps on 19:18, 13 April 23My UlifAC has arrived! One question regarding the 5v external power supply.Is it required for all usage, or can I use some functions without?I recall someone discussing an external supply on the USIfAC II thread, but I can't remember what it was for?I've had a dig around the manual, but other than the diagram, I can't see a reference to it. I'm guessing it's Centre +. I can look at buying/ making a splitter cable if necessary.My 6128 is going through a keyboard retr0brite session at the moment, so I'm not in a super rush Cheers!
Quote from: mdal on 07:46, 14 April 23Just received the new board and start learning its functions!!! I printed the case as described in the relevant topic USIfAC II:Convert a PC or USB stick to Amstrad HDD,access dsk's,and many more! (cpcwiki.eu) from the thingiverse repository (https://www.thingiverse.com/thing:4974135) board doesn't seem to exactly fit Do you have similar results?
Quote from: ikonsgr on 19:33, 02 May 23@JankyComps just use the single dsk image of orion prime (that's the good thing about having a real low level 765 Floppy Disk Controller emulation ) and no more need for disk swap ;-)I've tested it with USIfAC II (and ULIfAC on Amstrad CPC 464) and works perfect, i could also save/load games without problems. In fact i played it for quite a few hours
Quote from: Audronic on 13:45, 03 May 23@charger73 Thanks for that it was not mentioned in the GuideI will have a look Tomorrow (Thursday)
Quote from: charger73 on 06:02, 29 April 23received mine. i'm very happy:my favorite rom list works:maxamprotexthdcpm with 2 x big drivesi dont need more now
Quote from: Audronic on 06:01, 04 May 23@ikonsgr Ok I am getting tired of trying to set this thing up ?The |SW comes back with the machine Crashing ?Thats wonderfullIf I Press the RAM/ROM switch Then The Machine Crashes.Is there some way to do a master reset ?Not HappyRay
Quote from: charger73 on 12:28, 04 May 23Hi TakisI checked the site:https://www.cpcwiki.eu/index.php/HDCPM Please download the ROM:https://www.cpcwiki.eu/imgs/b/b1/Hdcpm106.dskCopy the HDCPM.ROM to the USB stick (root) (For example with the Filemanager in WinAPE) Please download the Diskimages here:https://www.cpcwiki.eu/imgs/4/4a/CPMDSK01%2602.zipCPMDSK01.IMGCPMDISK02.IMGCopy them to the USB Stick (root directory)(you even can make a copy of the image files to 03 and 04)On the CPC I plugged the rom in slot 9 with ¦MROM,"HDCPM.ROM",9Activate it with ¦SWstart the CPM with ¦HDCPMGood luck and best regardsTobie
Page created in 0.134 seconds with 27 queries.