ULIfAC:Usb Mass storage,WiFi, 512KB Ram/32XROM Board/256K Ram+16X Rom Board!

[Vitop69]

hello guys, sorry for my ignorance.
I bought an ESP8266-esp07 for my ulifac.
I followed john's manual by powering the ulifac with 5v, eliminated the jump and the wifi module lights up with a fixed red LED and a flashing blue one.
but I can't communicate with it either from the terminal with at+comand or from my pc with john's utility using rsx command wf,1 etc etc.
I have a doubt, do I have to flash the wifi module with a firmware to use it or am I doing something wrong?
Thanks for your support.

[Vitop69]

hello guys, sorry for my ignorance.
I bought an ESP8266-esp07 for my ulifac.
I followed john's manual by powering the ulifac with 5v, eliminated the jump and the wifi module lights up with a fixed red LED and a flashing blue one.
but I can't communicate with it either from the terminal with at+comand or from my pc with john's utility using rsx command wf,1 etc etc.
I have a doubt, do I have to flash the wifi module with a firmware to use it or am I doing something wrong?
Thanks for your support.

I report you my configuration from stat rsx command
Serial Port Speed: 921600
Interface ROM  Number: 5
Direct Mode:OFF
765 FDC Emulation:OFF
USB Device Enable: OFF (Auto:No)
DOS Emulation: AMSDOS

After WF,1 rsx command
Insert the right parametr for ssid, pwd, tcp hosting IP, and 1300 for port but I do not recive any message it's remain in stand by.