Started by Duke, 01:30, 02 February 19
0 Members and 1 Guest are viewing this topic.
Quote from: Duke on 20:20, 23 April 19Imperium Solo firmware update v1.0.1Changes:Fix issue with MS mice (@Maniac)Download: https://www.spinpoint.org/files/ImperiumSolo_Amstrad_v101.zipInstructions:Unpack the file IMPERSOL.BIN to root directory of a USB stick (FAT32).Insert it to Imperium Solo USB port and power it on. LED will be on shortly and once it starts flashing (few seconds later) firmware is updated. Remove USB stick and insert mouse/gamepad.File will be deleted from USB stick if succesful.
Quote from: Duke on 11:26, 21 April 19Mouses are supported, but only as AMX mouse. I guess it's just as good or crap as existing interfaces, maybe someone who has both can tell. As I don't have AMX or Bryce PS/2 interface.My custom proportional mode is not added to the release firmware, as there is no point since no software supports it.
Quote from: slugman on 22:32, 23 April 19I flashed my imperium Solo with the update and it works now perfectly with MS branded mouses. I tested successfully following Microsoft models:
Quote from: XeNoMoRPH on 22:43, 23 April 19this two report are about my main mouse yes ... and the other mouse that I would like to work with symbos
Quote from: Maniac on 01:07, 24 April 19Now that the mouse support is working I've managed to put a quick and dirty comparison video together using Advanced Art Studio as the test bed. I have an AMX mouse for my Plus which I hooked up and then did the same with the Imperium Solo and a number of USB devices. The Microsoft IntelliMouse is the worst of the lot! Hope this is useful to someone as a guide!
Quote from: GUNHED on 03:10, 25 April 19You could use a proportional mode, being compatible to the AtariST mouse adapter for the CPC (see Wiki). There is some software for it, including G-Paint, IMHO even better than OCP Art Studio.
Quote from: Duke on 23:32, 25 April 19Thanks to @Maniac, @slugman and @XeNoMoRPH for providing feedback. I used some of your info (and pictures) to fill into the database. Any feedback on USB devices tested will be much appreciated, so I can enter into the database and also make fixes if not working or the button mapping is not as desired etc.Please provide "make and model" + vendor id (vid) and product id (pid) and any useful notes.THANKS!
Quote from: Maniac on 23:44, 25 April 19One suggestion I'd like to make if I may; would it be possible to configure the speed of input per device? For instance the MS IntelliMouse is not quick in Windows until you adjust the settings so if something similar were configurable on the Imperium Solo that would great.
Quote from: MiguelSky on 02:03, 26 April 19Hi, Duke! I received my adapter, it works great with my PS4 controller. I have an old Trust Predator gamepad for PS2 that I usually use with my PC, but it doesn't work. I join the report.
Quote from: Duke on 11:26, 26 April 19Thanks. But I think the HID reports are for your mouse and not the Predator gamepad. Please select correct device and dump it again.
Quote from: Duke on 23:32, 25 April 19Yes I know I know... It's just my mode is better
Quote from: GUNHED on 16:15, 27 April 19Well, I'm pretty positive that PDT and me will support it in our projects. Of course it would be somehow a good thing to be able to "sense" if the device at the joystick port works as joystick or as proportional device.
Quote from: GUNHED on 20:02, 28 April 19That's a good way to do it! Just to be sure, you're talking about milli seconds, (not micro seconds), right?
Quote from: francouai on 00:22, 31 May 19I'm not surr to understand why there are two versions for the CPC?Regular got two fire and cpc+ got 3?
QuoteI have one old and one cpc+, so I need to buy your two version?
Quote from: francouai on 09:15, 12 August 19This interface is still not "THE" interface to use with SYMBOSS at this time with out specific driver, but this is the "best" solution at the moment.
Quote@Duke, how to see what FW the Imperium is running without start the upgrade process?
Quote from: francouai on 08:45, 13 August 19Do you mean you are working on another Imperium interface?or just a new FW upgrade?
Quote from: Arnaud on 17:56, 13 October 19this firmware solves the compatibility problem with my generic Xbox360 pad.
Quote from: Syncmaster319 on 01:15, 20 October 19Just been glancing your USB Controllers support page. I have a Thrustmaster T.Flight Hotas X!! Whats the game experience like with that???I notice you say the analog lever doesn't work which I assumes means the throttle?
Page created in 0.130 seconds with 24 queries.