Print Page - Vortex F1-D third drive adapter

Title: Vortex F1-D third drive adapter
Post by: hans on 07:12, 10 July 22

Hello,

I would like to correctly wire up a third drive to my Vortex F1-D controller, but I don't have the original adapter (https://www.cpcwiki.eu/index.php/Vortex_Disc_Drives#FDA-1_3.22_Drive_Adapter) to do that. I already know that the third drive is selected by ID3, but there seems to be some other magic going on. Does anyone here have this adapter and would be willing to send me detailed pictures of the internals? The pictures in the Wiki show hot snot all over the place, so it is impossible to see how the adapter is wired up.

Thank you!
Hans

Title: Re: Vortex F1-D third drive adapter
Post by: Poliander on 10:54, 10 July 22

I have another one where less hot glue was used:

Title: Re: Vortex F1-D third drive adapter
Post by: hans on 11:01, 10 July 22

Very helpful :D , thank you very much!

Hans

Title: Re: Vortex F1-D third drive adapter
Post by: xesrjb on 17:55, 10 July 22

@Poliander

Could you please post a complete Photo of this Adapter and the kind of plugs?

Thanks in advance...

Ok, I found the Photos in Wiki...

xesrjb

Title: Re: Vortex F1-D third drive adapter
Post by: Poliander on 18:39, 10 July 22

@xesrjb

I added two more images to the Wiki page (https://www.cpcwiki.eu/index.php/Vortex_Disc_Drives#FDA-1_3.22_Drive_Adapter)

Title: Re: Vortex F1-D third drive adapter
Post by: xesrjb on 18:41, 10 July 22

Quote from: Poliander on 18:39, 10 July 22@xesrjb

I added two more images to the Wiki page (https://www.cpcwiki.eu/index.php/Vortex_Disc_Drives#FDA-1_3.22_Drive_Adapter)

I've found it ...

thanks

xesrjb

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: hans on 07:12, 10 July 22