Hi Cpc Friends,
Here is a small utility which could be very usefull to adjust the colors of your CM14 monitors.
2 versions are availables, so please, tell me what is your first choice.
Thank you very much.
Oups, i forget to tell you that this tools is based on https://github.com/keirf/Amiga-Stuff/releases (https://github.com/keirf/Amiga-Stuff/releases)
I found the idea good for my lovely Amstrad Plus. :-*
Amiga?
Quote from: ComSoft6128 on 17:11, 30 July 21
Amiga?
The idea comes from Amiga, but the tools only runs on Amstrad Plus, of course.
How do you use it?
use run"diag or run"diag2
The Monitor CM14 would have to be switched on and opened then you could do all color adjustment.
I don't have a unit at hand, but what I meant was, ok, it shows pretty colors but how do you calibrate? Don't you need a reference?
For more information, you could ask @Kris (https://www.cpcwiki.eu/forum/index.php?action=profile;u=175) or @Bryce (https://www.cpcwiki.eu/forum/index.php?action=profile;u=225) or @TotO (https://www.cpcwiki.eu/forum/index.php?action=profile;u=290) :-*
Quote from: Gryzor on 19:29, 30 July 21
I don't have a unit at hand, but what I meant was, ok, it shows pretty colors but how do you calibrate? Don't you need a reference?
The goal is to set up the Red & Blue on the CRT board untill you reach the same level of RVB color on the screen. I have to do that following flyback & capacitors replacement.
Of course, you have to set up/check voltage (ie: +128V...) before performing color set up.
I would recommand to have your monitor running for at least 20mn before adjustements.
In my case, the blue was to high
Thanks, that was useful.