Author Topic: iMPdraw v2.0 (Read 22385 times)

Ast · « **Reply #75 on:** 10:57, 27 November 19 »

Quote from: Duke on 09:53, 27 November 19

Cool! Good work
Actually I was halfway into implementing the unlock/lock sequence, when I found that the best solution is to keep the CPC and CPC+ modes seperate. This using a .CPR/.BIN rom image and starting it with |CTR when wanting to use CPC+ mode roms on M4.
Ie. for one compatilibity with C4CPC.

I may change my mind again, but for now that would be the safe distribution form.

You mean, no change ?

Duke · « **Reply #76 on:** 14:26, 27 November 19 »

Quote from: Ast on 10:57, 27 November 19

You mean, no change ?

I think that is the overall best solution. Use .CPR / .BIN with the correct roms setup. Came to think of it M4 is the only hardware that does have CPC+ ROM mapping and also runs on classic CPC, so there is no best practice (yet). In |CTR mode all cartridge ROMS are disabled via ROMDIS and M4 owns the entire ROM space, in normal mode, they can co-exist but if M4 starts mapping roms according to RMR2 bit, I dont think cartridge games nor C4CPC can co-exist.

Ast · « **Reply #77 on:** 14:53, 27 November 19 »

1. With your first fixed, i have no problems! IMPdraw v2 runs perfectly and all the demos/games i’ve tested too.
2. With iMPdos i have no problems too.

Unfortunately, I won’t do any cartridge version for the moment...

Ast · « **Reply #78 on:** 12:23, 07 February 20 »

iMPdraw v2 - 200206 - Piccolo Edition

-Help Added

https://youtu.be/IEY_rvlapZI

-M4 card compatibility with Duke's "spécial" firmware (will be available with roms)

What's News ?

[Hard Sprite Mode]

CTRL+ESC to access hard sprites mode in fullscreen mode
[Select Hard Sprites Mode]

Up/down/left/right : Select your sprite
Return : Copy your selected sprite into memory
C : Paste your copied sprite onto a new emplacement
1, 2, 3, 4 : Select sprite 1-4 bank. Each bank displays 16 sprites. 4 banks=64 sprites.
CTRL+L : Load sprite .spr file.
CTRL+S : Save sprite .spr file.
Esc : Back into Fullscreen Mode.
Copy : Enter Hard Sprite Edition

[Hard Sprites Editor Mode]

Up/down/left/right : move your cursor.
F0/F. : Select Current colour
CTRL+F0/F. : Select 2nd colour
F7/F4 : Inc/Dec Green (from current colour)
F8/F5 : Inc/Dec Red
F9/F6 : Inc/Dec Blue
R : Rotate hard Sprite
H : Horizontal Flip
V : Vertical Flip
I : Linguee
Space : Put current colour pixel
Enter : Put 2nd colour pixel
DEL : Fill your selected sprite with colour 1& 2
iMPdraw is now composed of 3 roms.... Stay connected.

Ast · « **Reply #79 on:** 13:45, 07 February 20 »

Quote from: Ast on 12:23, 07 February 20

iMPdraw v2 - 200206 - Piccolo Edition

-Help Added

https://youtu.be/IEY_rvlapZI

-M4 card compatibility with Duke's "spécial" firmware (will be available with roms)

What's News ?
[Hard Sprite Mode]
CTRL+ESC to access hard sprites mode in fullscreen mode
[Select Hard Sprites Mode]
Up/down/left/right : Select your sprite
Return : Copy your selected sprite into memory
C : Paste your copied sprite onto a new emplacement
1, 2, 3, 4 : Select sprite 1-4 bank. Each bank displays 16 sprites. 4 banks=64 sprites.
CTRL+L : Load sprite .spr file.
CTRL+S : Save sprite .spr file.
Esc : Back into Fullscreen Mode.
Copy : Enter Hard Sprite Edition
[Hard Sprites Editor Mode]
Up/down/left/right : move your cursor.
F0/F. : Select Current colour
CTRL+F0/F. : Select 2nd colour
F7/F4 : Inc/Dec Green (from current colour)
F8/F5 : Inc/Dec Red
F9/F6 : Inc/Dec Blue
R : Rotate hard Sprite
H : Horizontal Flip
V : Vertical Flip
I : Linguee
Space : Put current colour pixel
Enter : Put 2nd colour pixel
DEL : Fill your selected sprite with colour 1& 2
iMPdraw is now composed of 3 roms.... Stay connected.

Oups, i forgot to tell you that RLE cruncher/decruncher has been coded by @cngsoft (Help page screen only!)

XeNoMoRPH · « **Reply #80 on:** 20:47, 07 February 20 »

Quote

-M4 card compatibility with Duke's "spécial" firmware (will be available with roms)

Is it a new firmware that has not yet been published?

Ast · « **Reply #81 on:** 23:19, 07 February 20 »

Quote from: XeNoMoRPH on 20:47, 07 February 20

Is it a new firmware that has not yet been published?

It's just a patch that allows you to use AmstradPlus' features.

Ast · « **Reply #82 on:** 16:15, 09 February 20 »

The lastest version (iMPdraw v2+iMPdos [Piccolo Edition]+M4rom (Asic edition)) is coming soon. iMPACT's members are in "beta testing" mode ^^

@kris are you ready ?

Stay tuned.

Ast · « **Reply #83 on:** 12:16, 10 February 20 »

Added a new todo-list today to make hard sprite editor better!!

Ast · « **Reply #84 on:** 18:45, 13 February 20 »

Here you can find the latest.

I'm thinking about publising this last one this week. Are you ready ?

Ast · « **Reply #85 on:** 23:46, 21 February 20 »

new on iMPdraw...

https://www.youtube.com/watch?v=C-jFYcd6u4A&feature=share

it's coming...

Ast · « **Reply #86 on:** 14:17, 10 March 20 »

Hi,

Sid/iMPact did iMPdraw's user guide translation.

http://orgams.wikidot.com/help-impdraw-english

Hope it could help you.

Ast · « **Reply #87 on:** 22:10, 11 March 20 »

Still in dev...

https://youtu.be/OAciL81J7gY

Ast · « **Reply #88 on:** 19:09, 12 March 20 »

Keep your current drive (even after a reset) when you're playing with iMPdraw v2.

https://youtu.be/R7HDIU5g7Qs

Ast · « **Reply #89 on:** 22:05, 19 March 20 »

Hi everyone,

I started and finished today iMPdraw wikidot website
I'm happy to think it will be easiest for you to find it now.

impdraw.wikidot.com

Have a good night!

Ast · « **Reply #90 on:** 20:35, 21 March 20 »

Still working...

https://youtu.be/4xGJtL_69mU

Ast · « **Reply #91 on:** 20:21, 23 March 20 »

Still coding mode_animation.

https://youtu.be/_PUX3uoC9Dg

https://youtu.be/7cp-mYnuLMQ

https://youtu.be/0t9cVspTjxI

Do you like it ?

Ast · « **Reply #92 on:** 19:05, 22 May 20 »

Discover [Animation Mode]!

https://youtu.be/jiif0cYA5PQ

Ast · « **Reply #93 on:** 23:31, 28 May 20 »

And now, catch and save your sprites ! It’s easy to do.

GUNHED · « **Reply #94 on:** 00:26, 29 May 20 »

Catch the sprite? You tell that as if it would be that easy, it just jumped out of the Window!

More serious, great too see this application growing - especially because it's for the Plus!

Ast · « **Reply #95 on:** 10:38, 29 May 20 »

Quote from: GUNHED on 00:26, 29 May 20

More serious, great too see this application growing - especially because it's for the Plus!

Not only for plus but for Amstrad cpc and plus!
The purpose was to offer you a global solution. Do i touch the goal ?

GUNHED · « **Reply #96 on:** 12:02, 29 May 20 »

Quote from: Ast on 10:38, 29 May 20

Not only for plus but for Amstrad cpc and plus!
The purpose was to offer you a global solution. Do i touch the goal ?

Of course! Eventually on the real machine we now have all the software we ever did dream of! And what I really like is, that we do have it running an real CPCs/Plus! There was a trend to do everything on a PC. Well, if everything is done on a PC then the question is: Why to use a CPC at all?

Now since we have DOS for modern mass storage, new GFX programs, assemblers and so on... we CAN use our Plus / CPCs for everything - and I love that.

Ast · « **Reply #97 on:** 13:27, 01 June 20 »

Animation Mode accepts to save animation steps (.imp format)

https://www.youtube.com/watch?v=Tkccfk-YdXE&feature=share

Ast · « **Reply #98 on:** 18:50, 01 June 20 »

Animation Mode ++ Catch the differents steps ++ Save your sprites/tiles/gfx...

Amazing ? IMPdraw can do it for you

https://youtu.be/8MFiUMd4daM

Ast · « **Reply #99 on:** 14:06, 15 June 20 »

New sector/memory edition on iMPdos.

I fixed the GUI and hunted some old bug.
Now, iMPdos is proposed in two versions 128 and 512.
It depends how much memory you have.

News:

Author Topic: iMPdraw v2.0 (Read 22385 times)