MicroDesign Plus

Started by arnoldemu, 13:22, 03 December 17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Titi

Petite question à propos de MD+ :
J'ai téléchargé l'appli via cpc rulez. Lorsque j'essaie de copier le logiciel avec discology pour le mettre sur une disquette 3,5 pouces , ça ne fonctionne pas ( la copie ne commence pas ) . Comment faire ?

ComSoft6128

Could I have the question in English please?

Titi

I would like to copy MD+ from gotek to 3.5 floppy disk because MD+ only works in drive A and my Gotek is drive B .

The problem is that the copy does not launch with discology

So how to copy MD+ from gotek to floppy drive?

ComSoft6128

I thought that might be the problem.

So this morning I tried the Nirvana and Xexor disc copiers to see if I could copy my own personal copy of MicroDesign Plus to drive B to create a .dsk image but unfortunately both failed. I was hoping Discology would do the job but obviously not. I could try to create a copy of MD+ using my original masterdisc and see if that works.

Titi

Quote from: ComSoft6128 on 15:46, 22 April 22I thought that might be the problem.

So this morning I tried the Nirvana and Xexor disc copiers to see if I could copy my own personal copy of MicroDesign Plus to drive B to create a .dsk image but unfortunately both failed. I was hoping Discology would do the job but obviously not. I could try to create a copy of MD+ using my original masterdisc and see if that works.
Ok , thanks :)

ComSoft6128

OK,

Xexor will copy using MD+ from drive A to drive A but not from B.
Why - I simply can't remember - there was a valid reason but what it was escapes me.
However I now have a working copy of the full package on 3" disc which, as we released 
it 30 years ago, you can have at a 50% discount!  ;D

Joking aside, PM your name and address and I'll send it off to you next week sometime, gratis. ;)

Titi

Quote from: ComSoft6128 on 16:33, 22 April 22OK,

Xexor will copy using MD+ from drive A to drive A but not from B.
Why - I simply can't remember - there was a valid reason but what it was escapes me.
However I now have a working copy of the full package on 3" disc which, as we released
it 30 years ago, you can have at a 50% discount!  ;D

Joking aside, PM your name and address and I'll send it off to you next week sometime, gratis. ;)
Thank you very much : ) 

ComSoft6128

#232
The attached .Dsk file contains the MD files for the Japanese goddess and the Martian tripod war machine shown on pages 1 & 3 of this thread.
MicroDesign Plus is not required to load and display these files - the original MicroDesign/Oxford PAO will do fine.



You cannot view this attachment.

Titi


ComSoft6128

:)  Top marks!  :)

Skunkfish

Wow, it's a thing of beauty. I love it!
An expanding array of hardware available at www.cpcstore.co.uk (and issue 3 of CPC Fanzine!)

Titi

Quote from: Skunkfish on 10:08, 25 June 22Wow, it's a thing of beauty. I love it!
Thanks 🙂

ùcpm number 2 is looking for editors ... subject to choose from 😀

ComSoft6128

ùCPM n°01 fanzine by 'TiTi'

This is the disc version of the hardcopy French fanzine released in June 2022.
Likely to be the the first CPC paper fanzine in over two decades!
Disc version courtesy of 'Kukulcan' at CPCPOWER.

As the fanzine "page" is larger that the screen I scroll thru each page using the cursor keys - if you find a particular graphic or piece of text interesting hit the pause key.

Hardware used:
CPC 6128 (with a Gotek & a 3.5" drive), Rombo VIDI digitizer & Canon BJ- 200ex inkjet printer.

Software used:
MicroDesign Plus(Oxford PAO Plus)



Links:
https://www.cpc-power.com/index.php?page=detail&num=18718
https://cpcrulez.fr/demostestPM_ucpm_n01.htm
https://www.cpc-power.com/index.php?page=staff&lenom=Titi
https://cpcrulez.fr/applications_graphic-compilation-digits_a_gogo.htm
https://www.cpcwiki.eu/index.php/VIDI_digitizer

Not emulated - original hardware and software.
Please note that the aspect ratio for this YouTube video is 16:9 but the CPC monitor
has an aspect ratio of 4:3 so you may wish to adjust your viewing device accordingly.

poulette73

Nice work Thierry ! 👍

Titi

ùCPM #2... next week ! 


OffseT

Quote from: Titi on 10:55, 19 September 22ùCPM #2 :

https://e1.pcloud.link/publink/show?code=kZTVk8Z26LDvHTsJGpFzfSt7G2aeRmfHhX7

Quite nice to see such a fanzine today! Thanks for reviving Oxford PAO paper mags! 8)
For fun, I just printed it of my good old BJ200ex! (the one we used for Quasar CPC). ;D

Titi

Quote from: OffseT on 14:54, 21 September 22
Quote from: Titi on 10:55, 19 September 22ùCPM #2 :

https://e1.pcloud.link/publink/show?code=kZTVk8Z26LDvHTsJGpFzfSt7G2aeRmfHhX7

Quite nice to see such a fanzine today! Thanks for reviving Oxford PAO paper mags! 8)
For fun, I just printed it of my good old BJ200ex! (the one we used for Quasar CPC). ;D
Thanks Offset. I still haven't figured out how to print a full page with the CANON (hence a slightly reduced page on Micro Design/Oxford PAO).
What would be really fun would be a number 22 of the best CPC fanzine: QUASAR CPC :)

OffseT

You need to create two DR files per page to be able to print a full height page with Oxford PAO (just a little more work :P).
Our Canon driver can print them joint, so that it looked like a single page. ;D

Titi

Quote from: OffseT on 15:47, 21 September 22You need to create two DR files per page to be able to print a full height page with Oxford PAO (just a little more work :P).
Our Canon driver can print them joint, so that it looked like a single page. ;D
I'll check back this week then. Because it's really nice a full height  page ! 

ComSoft6128

ùCPM n°02 fanzine by 'TiTi' & 'Kenshiro72'

This is the disc version of the hardcopy French fanzine released in September 2022.
Some great graphics here!
Disc version courtesy of 'Kukulcan' at CPCPOWER.

As the fanzine "page" is larger that the screen I scroll thru each page using the cursor keys - if you find a particular graphic or piece of text interesting hit the pause key.

ùCPM PDF here:
https://cpcrulez.fr/demostestPM_ucpm_n02.htm

Hardware used:
CPC 6128 (with a Gotek & a 3.5" drive), Rombo VIDI digitizer & Canon BJ- 200ex inkjet printer.

Software used:
MicroDesign Plus (Oxford PAO Plus)



Links:
https://www.cpc-power.com/index.php?page=detail&num=18718
https://cpcrulez.fr/demostestPM_ucpm_n01.htm
https://www.cpc-power.com/index.php?page=staff&lenom=Titi
https://cpcrulez.fr/applications_graphic-compilation-digits_a_gogo.htm
https://www.cpcwiki.eu/index.php/VIDI_digitizer

Not emulated - original hardware and software.
Please note that the aspect ratio for this YouTube video is 16:9 but the CPC monitor
has an aspect ratio of 4:3 so you may wish to adjust your viewing device accordingly.

ComSoft6128

Camcorder digitised images in MicroDesign Plus

1992

Hardware used:
Camcorder/VIDI digitiser/CPC 6128 or 6128 Plus.



Links:
https://www.cpcwiki.eu/index.php/MicroDesign_Plus
https://cpcrulez.fr/applications_PAO-micro_design_plus.htm
https://www.cpcwiki.eu/index.php/VIDI_digitizer

Not emulated - original hardware and software.
Please note that  the aspect ratio for this YouTube video is 16:9 but the CPC monitor
has an aspect ratio of 4:3 so you may wish to adjust your viewing device accordingly.

ComSoft6128

                                                              MicroDesign 2 CPC (Beta)

This is a Beta test version of the program that was never completed.




Not emulated - original hardware and software.
Please note that  the aspect ratio for this YouTube video is 16:9 but the CPC monitor
has an aspect ratio of 4:3 so you may wish to adjust your viewing device accordingly.

Titi

Quote from: ComSoft6128 on 09:53, 03 October 22MicroDesign 2 CPC (Beta)

This is a Beta test version of the program that was never completed.




Not emulated - original hardware and software.
Please note that  the aspect ratio for this YouTube video is 16:9 but the CPC monitor
has an aspect ratio of 4:3 so you may wish to adjust your viewing device accordingly.
@OffseT  : Tu dois voir cette vidéo !!

Powered by SMFPacks Menu Editor Mod