Multiplan for CP/M 2.2 with Vortex Ramexpansion

[kaufi110]

Hello everyone,

I am looking for the Multiplan version for CP/M 2.2 in Vortex format.

I am currently trying to get Multiplan to run on my old CPC 464 with Vortex Ram Expansion and FD-1 Diskstation.

I have a Multiplan 1.06 version for the CPC 6128 and CP/M 3.1. Unfortunately I can't get this version configured properly in Install.com.

I can't find the right terminal, I know that there is a special version for Vortex CP/M 2.2 + Vortex Ram Expansion or a configuration.

Does anyone know the right terminal or has a suitable Multiplan version?

Thanks for your help

kaufi110
Translated with DeepL.com (free version)

[poulette73]

Hello,

I don't know if this help...
Maybe try these versions ?

https://cpcrulez.fr/f/1a63
https://cpcrulez.fr/f/55i6
https://cpcrulez.fr/f/u9v
https://cpcrulez.fr/f/9xf3

or

https://www.cpc-power.com/index.php?page=detail&onglet=dumps&num=4181
(the last 2 files)

[kaufi110]

Hello everyone,



I have solved the problem. Using the Multiplan install you can customize the software so that it also runs on CPM 2.2 Vortex with ram extension and on CPM 2.2 from Schneider (Amstrad) with DKtronik ram extension. The commands for customizing come from the manual of the floppy DD-1 but the adjustment of the rows and columns is pure trial and error.



Greetings Kaufi110

[eto]

but the adjustment of the rows and columns is pure trial and error.

Could you share the settings?

If anyone ever has the same issue, they will be happy to find it here.

[kaufi110]

Sorry for the delay don't no if its possible to share files here, so i give you the link to the other forum were i am activ.

This is the file for Vortex floppy with CP/M 2.2 and 62k TPA and  Multiplan:
https://www.forum64.de/wcf/index.php?attachment/475613-multiplan-vortex-dsk/and

additional in Schneider CPC Format for CP/M 2.2 with DKtronik Ramexpansion:

https://www.forum64.de/wcf/index.php?attachment/475614-mp-106-dsk/

In the Vortex DSK also the Instal is included.

I use the files from: 

https://www.cpc-power.com/index.php?page=detail&onglet=dumps&num=4181

and modified them.

What I did was adding the instal line  three for coursor settings:

First you have to use &1F for courser positining.
The next step: first column then row (CR) and modifie the standard setting from 32 to 1 for colum and row.
For Multiplan Version 1.06 its also importent that the first position is 0,0 left upper corner.