News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu

New version of ConvImgCpc

Started by demoniak, 17:42, 11 February 21

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Nemo59

#25
Mix of overscan mode 0 and mode 1 pn my CPC+, converted with ConimgCPC.
CPC 6128+ / CPM+/ Turbo PASCAL v3
https://cpcrulez.fr/auteur-nemo59.htm

ComSoft6128

O I like these!
Will there be a .dsk of these screens available?
I'd love to see them on my Plus and very likely (guaranteed) they would end up as a YT video.

Nemo59

Quote from: ComSoft6128 on 18:26, 13 November 22O I like these!
Will there be a .dsk of these screens available?
I'd love to see them on my Plus and very likely (guaranteed) they would end up as a YT video.
Hi, is a 720Kb .dsk OK? They are among anothers .scr without embedded display code.  
CPC 6128+ / CPM+/ Turbo PASCAL v3
https://cpcrulez.fr/auteur-nemo59.htm

ComSoft6128


McArti0

Nemo, could you use the CPCEC emulator and take a screenshot? avengers.jpg

CPCEC works well with mixed color...
CPC 6128, Whole 6128 and Only 6128, with .....
NewPAL v3 for use all 128kB RAM by CRTC as VRAM
TYPICAL :) TV Funai 22FL532/10 with VGA-RGB-in.

Nemo59

#30
Hi,

I attached 2 .dsk here :

1/ CPM3-OVS is a standard 3" dsk image. You can boot CPM3 on this disk. This version of CPM recognise a C:  RAM disk if there is a memory expansion and a drive B: of 720kB . The program DSP.COM allows to display one or more overscan images (like a slideshow, in CPM3). On the CPM command line just type :DSP corto or DSP corto  avengers startrek misstic  etc. Of course you can use your own CPM version.

2/ overscr.dsk is a 720kB disk. It works fine with a gotek as drive B or winape emulator. The are more overscan images on it and also the DSP.COM and the source file DSP.PAS. The Turbo Pascal compiler with correct keyboard ans screen for the CPC is also provide ( TURBO.COM

All this is only for CPC6128+. All the overscan images uses a 4096 palettes colors as defined with the ConvImgCPC soft.

You cannot view this attachment.
You cannot view this attachment.

Mode 1 conversion of escher
CPC 6128+ / CPM+/ Turbo PASCAL v3
https://cpcrulez.fr/auteur-nemo59.htm

ComSoft6128

Thank you :)

CPM3-OVS is fine but overscr.dsk is showing as a blank 716K Romdos D1?


ComSoft6128

My bad,

Your version of CPM works fine, mine doesn't.

ComSoft6128

#33
OK, a little update.

Comete & Manara don't Run from AMSDOS.

DSP attempts to load them and then resets back to AMSDOS.

DSP works fine with all the other files.

Nemo59

#34
Thanks for reporting.  I will see that tonight.  I'm not sure I posted the latest version. Possibly a border effect because i remember that I forget to delock the Asic in a previous DSP version and got the same problem. I had not noticed it because the asic unlocking persists even after a hot reboot.  it only disappears after an On/off of the CPC. Perhaps the DSP.Com on the 720kb disk is not the good version.
CPC 6128+ / CPM+/ Turbo PASCAL v3
https://cpcrulez.fr/auteur-nemo59.htm

ComSoft6128

#35
Video for YT on Saturday.


https://www.youtube.com/watch?v=niGIL1mc520

Please note the blue border on three sides of each of the screens is a display "quirk" of the OSSC.

ComSoft6128

I'm interested in how these are displayed.
CPM has no graphics mode(s) so I assume you would exit from CPM to AMSDOS and then back to CPM.
But I can't see how you would get back to CPM?

Or.....?

Nemo59

#37
Or ...  Or perhaps  Amstrad has done a good job with its versions of CPM for CPC ;D These versions have in the BIOS of the CPM an entry point to the firmware (Userf). It allows easy access to graphics, sounds, etc. I use this possibility.

see:

and the links to the programs in my signature.

I didn't post the correct 720KB floppy yesterday. I can no longer change my old message. The correct version is attached here with more pictures and the correct DSP.COM program
CPC 6128+ / CPM+/ Turbo PASCAL v3
https://cpcrulez.fr/auteur-nemo59.htm

poulette73

Wow... at this point you really have a crazy talent !

It's incredible all the possibilities offered by Turbo Pascal v3 on Amstrad. A really little known language but very powerful (I had made some small programs about thirty years ago on my CPC... but very very far from all that).

You show us that anything is possible here.
As much on Amstrad old as on Amstrad plus.
The integration of Z80 code, through the syntax of Turbo Pascal, makes it possible to open up to a wider public the discovery of the assembler.

Thank you again for everything you share with us on the forums and on your YouTube channel. 👍

ComSoft6128

#39
ConvImgCpc CPM slideshow by 'Nemo 59' (1)


https://www.youtube.com/watch?v=rVSpVAKdow0

ConvImgCpc CPM slideshow by 'Nemo 59' (2)


https://www.youtube.com/watch?v=_Cri4fOrehU

Not emulated - original hardware and software.
Please note that  the aspect ratio for this YouTube video is 16:9 but the CPC monitor
has an aspect ratio of 4:3 so you may wish to adjust your viewing device accordingly.


ComSoft6128


Powered by SMFPacks Menu Editor Mod