Orgams & Unidos

[HAL6128]

On my CPC (XMem + Albireo) I installed Unidos (+ patched firmware, but without tools) and tried to run Orgams. It didnt't work, just reseted the CPC after |org. Has anybody encountered the same issue or solved it?

[OffseT]

It should work, this is typical configuration.

Which ROM versions are you using?
What happens with |ORGAMS or |O ?

[HAL6128]

I tried to follow the recommendations (alternate configuration):

My actual configuration of ROM slots is:

5 - Unidos (1.50)
7 - Amdos (can't change it) > therefore I installed a patched version of the Firmware (u5)
27 - Albireo (1.41)

ORGAMS-Version: "orgams-230115-FF-betaH.dsk" on...
10 - Orgams
29 - Orgext
30 - Monogams
31 - BricBrac

After |O or |ORG the CPC just resets. Didn't tried |ORGAMS RSX.

I've configured an automatic startup with a #Boot.CFG file where the SD of the Albireo starts as the first drive and the DFA as the second.

[GUNHED]

Can you park Albireo ROM and then try again?

[OffseT]

Looks fine to me, should really work out of the box.

You may want to check ROMs checksum?
Also you could test without the patched firmware (but it should not be related at all).

[HAL6128]

Oh, indeed. It seemed to be a defective ROM. After downloading it the second time and uploaded it, it works perfectly.

This time I transferred the DSK file directly with CPCDiskXP onto a 3" floppy.

Last time (when it didn't work) I extracted the ROMs from the image onto the SD card / folder. Maybe a wrong setting for extracting (header issue)? Have to check it.

[OffseT]

Good news!