Cpc-Diag

Started by Ast, 18:49, 30 July 21

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ast

Hi Cpc Friends,

Here is a small utility which could be very
usefull to adjust the colors of your CM14 monitors.

2 versions are availables, so please, tell me what is your first choice.

Thank you very much.
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"

http://amstradplus.forumforever.com/index.php
http://impdos.wikidot.com/
http://impdraw.wikidot.com/

All friends are welcome !

Ast

Oups, i forget to tell you that this tools is based on https://github.com/keirf/Amiga-Stuff/releases
I found the idea good for my lovely Amstrad Plus.  :-*
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"

http://amstradplus.forumforever.com/index.php
http://impdos.wikidot.com/
http://impdraw.wikidot.com/

All friends are welcome !

ComSoft6128


Ast

Quote from: ComSoft6128 on 19:11, 30 July 21
Amiga?
The idea comes from Amiga, but the tools only runs on Amstrad Plus, of course.
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"

http://amstradplus.forumforever.com/index.php
http://impdos.wikidot.com/
http://impdraw.wikidot.com/

All friends are welcome !

Gryzor

How do you use it?

Ast

use run"diag or run"diag2


The Monitor CM14 would have to be switched on and opened then you could do all color adjustment.
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"

http://amstradplus.forumforever.com/index.php
http://impdos.wikidot.com/
http://impdraw.wikidot.com/

All friends are welcome !

Gryzor

I don't have a unit at hand, but what I meant was, ok, it shows pretty colors but how do you calibrate? Don't you need a reference?

Ast

#7
For more information, you could ask @Kris or @Bryce or @TotO  :-*
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"

http://amstradplus.forumforever.com/index.php
http://impdos.wikidot.com/
http://impdraw.wikidot.com/

All friends are welcome !

Kris

#8
Quote from: Gryzor on 21:29, 30 July 21
I don't have a unit at hand, but what I meant was, ok, it shows pretty colors but how do you calibrate? Don't you need a reference?


The goal is to set up the Red & Blue on the CRT board untill you reach the same level of RVB color on the screen. I have to do that following flyback & capacitors replacement.
Of course, you have to set up/check voltage (ie: +128V...) before performing color set up.
I would recommand to have your monitor running for at least 20mn before adjustements.

In my case, the blue was to high

Gryzor

Thanks, that was useful.

Powered by SMFPacks Menu Editor Mod