Printed Amstrad Addict magazine announced, check it out here!
Started by pollito, 08:45, 16 May 23
0 Members and 1 Guest are viewing this topic.
Quote from: poulette73 on 09:36, 16 May 23Hello,You can find all on this thread : cpcwiki.eu/forum/nc100-nc200-pcw-pda600/a-glut-of-software-manuals-etc-for-new-pcw-or-gotek-owners-enjoy-)/
Quote from: GeoffB17 on 14:30, 16 May 23If you've got an 8512, then you need the 8256/8512 disk set (2 disks, 4 sides). The 9512 disks will be no use to you.Have you any disks at all? It would be useful to know if your A: drive works, can try to boot. If you get disks, and then cannot read them, you've got a new problem? The usual problem with the old machines is that the floppy drives use a rubber band, and the rubber will have deteriorated. Just a few ££ to replace, and easily available, but it's a fiddly job and the innards of the drive may need careful cleaning.Many people have taken the Gotek route, which would solve a number of problems for you. If you do that, the 1.15 system mentioned above will cause new problems, you need a much older system, see discussions on the forum about this.Geoff
Page created in 0.049 seconds with 24 queries.