WinApe Memory Full

[professor6153]

Good morning, 

I have been playing Tyrann ( a French RPG ) using Winape 2.0 Beta 2.  Everything works very well and I am able to save a scenario to tape.  My problem starts when I am trying to LOAD the scenario from the tape.  After awhile I get a Memory full with a Ready prompt.  I thought I have tried all the different memory permutations with the same result.  I am positive I am doing something incorrect or have missed the proper setting.  Does anyone have any ideas as to what I can try regarding the proper memory tweaks?  I would really appreciate any help.  Thank you for taking the time to read me and thanks in advance

[roudoudou]

probably parados ROM, use legacy ROM (there is a preset without parados, just use it)

[professor6153]

Do you mean try Parados?  I did and still received the Memory Full message just now.  I've also tried the default where no ROM is selected.  Here are my ROM choices - which one is the Legacy ROM - use with 4M expansion choice?

[professor6153]

I also checked the box Disable All ROMS and tried and still got the same Memory Full error.  I saw a person post on the internet that they received the same Memory Full error and then tweaked the settings to get it to work so I'm sure I have not stumbled on the right combination yet.  I really appreciate any help anyone can provide.

[professor6153]

I will send $100 to the first person who corrects this problem for me.  That's a promise

[roudoudou]

in the Profile list, select a configuration WITHOUT parados

http://winape.net/help/general_settings.html

[professor6153]

I tried every configuration under the profile list and still get the Memory Full error

[andycadley]

Memory Full is a BASIC error and BASIC only uses the first 64K. So you probably want to pick a 464 Model (not a 464+) with no disk drive, no expansion ROMs at all and turn off any memory expansions or other devices.

[professor6153]

When I choose C464 with or without PARADOS I get a black screen and nothing is happening when I load the disk. 464 plus works but again I always get the Memory full error

[GUNHED]

Try another emulator. If the problem remains, it could be a problem of the game itself.

[professor6153]

I know the disk is good - it's something I'm not doing right

[andycadley]

I know the disk is good - it's something I'm not doing right

Ok, so it's a disk game? Wasn't clear because you talked about saving to tape.

In that case, take your 464 configuration, enable a single disk drive and an AMSDOS ROM in slot 7. That should be the minimum memory configuration.

[professor6153]

It IS a disk game - but they want you to save your progress to tape.  I have no problem saving to tape.  I also seem to have no problem as the characters are progressing loading the saved tape.  It's when I get ready to go to the next dungeon level that I get a Memory full error when loading the tape. I'm playing again, started over, and am saving and loading with no errors so far.  I'll see if I progress to a point where it happens again

[professor6153]

So I just started over again - the tape saves and loads - until I start to make some progress and the characters begin to purchase more items...suddenly a Memory Full error - there has to be a combination that allows me to successfully load these tape saves

[McArti0]

2 Faces? 1 Face? Hack?

[professor6153]

I apologize I don't understand this question

[andycadley]

So I just started over again - the tape saves and loads - until I start to make some progress and the characters begin to purchase more items...suddenly a Memory Full error - there has to be a combination that allows me to successfully load these tape saves

Maybe not. Maybe the game is just bugged?

If it's BASIC, it might be possible to fix it.

[Jean-Marie]

Try using those settings. Also, put the Os464_(French_AZERTY).rom file in your ROM folder.

[professor6153]

Thank you so much I am going to try this.  Where can I obtain the Os464_(French_AZERTY).rom?  I'm googling and looking for it now but striking out so far

[professor6153]

So odd - I downloaded your Rom and .ini file you gave me - windows won't let me extract it or copy it into my Winape folder - I keep getting error messages  

[Jean-Marie]

Most odd... Could be your antivirus acting up (although there's nothing to worry about). Try turning it off for a moment. Are you logged on Windows as an administrator?
Anyway, you can trick Windows by copying the enclosed Text file in your ROM folder. Then, you'll need to change the extension from TXT to ROM.
edit: Also, this file is not compulsory, it's just to make your life easier if you're using a french keyboard...

[professor6153]

Well under the settings you gave me it won't even boot the disk - it's just a black screen - under properties - which machine did you want me to select?

[professor6153]

Actually it's because I still cannot access your winAPE.ini file that you created.  I disabled my antivirus software and checked my administrative tasks and I don't get why it won't let me do anything with the file.  I've never encountered that before.  Your solution for the Os464 worked perfectly...if you could rename the WinAPE.ini to .txt and I'll do the same thing there.  Hopefully then the settings will be as you want and this will work.   Thank you for all your help.  If this works I am going to reward your time 

[Jean-Marie]

An easy workaround is to edit your WinAPE.ini file with Notepad, and copy/paste the code below, and save it.

Code Select Expand

[ROMS]
Cartridge=
Lower=Os464_(French_AZERTY)
Upper(0)=BASIC1-0
Upper(1)=
Upper(2)=
Upper(3)=
Upper(4)=
Upper(5)=
Upper(6)=
Upper(7)=AMSDOS
Upper(8)=
Upper(9)=
Upper(10)=
Upper(11)=
Upper(12)=
Upper(13)=
Upper(14)=
Upper(15)=
Upper(16)=
Upper(17)=
Upper(18)=
Upper(19)=
Upper(20)=
Upper(21)=
Upper(22)=
Upper(23)=
Upper(24)=
Upper(25)=
Upper(26)=
Upper(27)=
Upper(28)=
Upper(29)=
Upper(30)=
Upper(31)=
Multiface=
Cartridge Enabled=false
Multiface Enabled=false
Disable All=false
Enable L07=false

[Configuration]
Refresh Rate=1
Display Mode=1
Sound Mode=3
Sound Volume=15
Full Screen=false
Direct Video=false
Sound Bits=16
Sound Stereo=true
Sound Frame Delay=0,0
Show ASIC=false
Keyboard File=default.kbd
CRTC Type=0
Auto Run=false
Disable Update=false
Turbo Mode=false
Joystick Enabled=true
AMX Mouse Enabled=false
Emulation Speed=100
Frame Skip=false
VHOLD Position=0
Full Screen 16=true
Enable IDE=true
Master IDE Type=0
Master IDE Path=
Slave IDE Type=0
Slave IDE Path=
Enable Clock=false
Enable Mouse=false
Adjust Mouse=true
Monitor Type=0
Monitor Brightness=0
Linear Palette=false
PAL Emulation=false
On Screen Drive LED=true
Show Track=true
Enable Plus=false
Plus PPI=false
Extended RAM=2
Silicon Disc=false
Enable 32 ROMs=true
Position=253,15
Half Size=false
DirectX Stretch=true
Stretch Size=768,590
Render Both=true
Hide Panel=false
Hide Mouse=true
Hide Menus=false
No Right Click=false
Half Size FS=false
Render Both FS=true
Hide Panel FS=true
Hide Mouse FS=true
Hide Menus FS=true
No Right Click FS=true
Disc Sound=true
Tape Sound=true
AmDrum Enabled=true
Maximised=false
SmartWatch ROM=-1

[Drives]
Drive(0)=
Drive(1)=
Allow Write 0=false
Prompt Write 0=false
Single Sided 0=false
Allow Write 1=false
Prompt Write 1=false
Single Sided 1=false
Drive(2)=
Allow Write 2=false
Prompt Write 2=false
Single Sided 2=false
Drive(3)=
Allow Write 3=false
Prompt Write 3=false
Single Sided 3=false
Drive(4)=
Allow Write 4=false
Prompt Write 4=false
Single Sided 4=false
Drive(5)=
Allow Write 5=false
Prompt Write 5=false
Single Sided 5=false
Drive(6)=
Allow Write 6=false
Prompt Write 6=false
Single Sided 6=false
Drive(7)=
Allow Write 7=false
Prompt Write 7=false
Single Sided 7=false
Last Drive=1
Fast Disc=true

[Debug Windows]
Debug=false
Dump=false
Stack=false
Disassemble=false
Registers=false
Break Instructions=true
Hide On Run=true
Position=-7,-1
Size=727,680
BreakPos=470,388
BreakSize=379,164
Breaks=false
RegsPos=200,100
Graphics=false
GraphicsPos=198,80
GraphicsSize=700,597
DataAreaPos=100,300
DataAreaSize=316,110
Data Areas=false
TimerPos=100,500
TimerSize=316,110
Timers=false
DiffPos=200,300
DiffSize=316,110
Show ASIC=true
Row Highlight=false
Follow PC=true
Breaks Enabled=true

[CPCDOS]
Path=


[Snapshot]
Last Opened=
Last SNR=

[Screenshots]
Save On Flyback=true
Filter=4
Half Size=false
Half Height=false
Last Path=C:\Users\eurom\Desktop\
[Pokes]
Position=100,100
Size=420,400
[Tape]
Position=1017,240
Size=245,117
Visible=false
File Name=
[Printer]
Type=0
Name=OneNote (Desktop)
File Name=
Tab=
[AVI Writing]
Full Size=false
[Assembler]
Position=714,65
Size=566,514
Visible=false
Library Path=
Push PC On Run=true
Hide Output=false
SymbolPos=500,100
SymbolSize=340,120
[Formats]
PARADOS 80=10,#91,5,80,1,4,#C7,0,128,1,#10,#E5
PARADOS 41=10,#81,5,41,1,3,#CC,0,64,0,#10,#E5
PARADOS 40D=10,#A1,5,40,2,4,#C7,0,128,1,#10,#E5
ROMDOS D1=9,#01,5,80,2,4,#167,0,128,0,#52,#E5
ROMDOS D2=9,#21,5,80,2,4,#167,0,256,0,#52,#E5
ROMDOS D10=10,#11,5,80,2,4,#18F,0,128,0,#10,#E5
ROMDOS D20=10,#31,5,80,2,4,#18F,0,256,0,#10,#E5
ROMDOS D40=10,#51,5,40,2,4,#C7,0,128,0,#10,#E5
S-DOS (ROMDOS D80)=10,#71,5,80,1,4,#C7,0,128,0,#10,#E5
DATA (SS 40)=9,#C1,5,40,1,3,#B3,0,64,0,#52,#E5
DATA (DS 40)=9,#C1,5,40,2,4,#B3,0,128,1,#52,#E5
DATA (SS 80)=9,#C1,5,80,1,4,#B3,0,128,1,#52,#E5
DATA (DS 80)=9,#C1,5,80,2,5,#B3,0,128,3,#52,#E5
SYSTEM (SS 40)=9,#41,5,40,1,3,#AA,2,64,0,#52,#E5
SYSTEM (DS 40)=9,#41,5,40,2,4,#AE,2,128,1,#52,#E5
SYSTEM (SS 80)=9,#41,5,80,1,4,#AE,2,128,1,#52,#E5
SYSTEM (DS 80)=9,#41,5,80,2,5,#B0,2,128,3,#52,#E5
IBM (SS 40)=8,#01,1,40,1,3,#9B,1,64,0,#50,#E5
IBM (DS 40)=8,#01,1,40,2,4,#9D,1,128,1,#50,#E5
IBM (SS 80)=8,#01,1,80,1,4,#9D,1,128,1,#50,#E5
IBM (DS 80)=8,#01,1,80,2,5,#9E,1,128,3,#50,#E5
PCW (SS 40)=9,#01,5,40,1,3,#AE,1,64,0,#52,#E5
PCW (DS 80)=9,#01,5,80,2,4,#164,1,256,0,#52,#E5
ULTRAFORM=10,#10,5,41,1,3,#CC,0,64,0,#10,#E5
VORTEX=9,#01,5,80,2,5,#B0,2,128,3,#52,#E5
I had a quick look at Tyrann, and it's possible to save your progress on Disc rather than Tape. You can even save your progress on the original disc, as there is enough free space on it.
You'll find the original disc version in enclosure, taken from CPC-Power.
It's always safer to rely on original versions from serious websites, rather than cracked versions which can be buggy.
Don't bother rewarding me, and give some money to the WinAPE creator instead:
https://donorbox.org/7cc48097-5c49-46af-bbc7-32523bc0e0a4
 Thanks for the kind offer though.

[professor6153]

I feel like I'm getting closer - I do NOT have a french keyboard - so I replaced with Os464 and it I loaded an old file that I couldn't load before - and it worked - I did try the original disk as you suggested - I thought I would start over - and that wouldn't even load - it hung with those settings...when I loaded the "cracked" disk - it worked.