Started by 8bitTinShed, 12:36, 28 October 21
0 Members and 1 Guest are viewing this topic.
Quote from: GUNHED on 18:12, 28 October 21IIRC there was a special 'fixed' cpcwiki version of Zynaps, with enhanced menu and bigger loading picture, right?I don't find it at the moment, but it would be cool the have the new pokes in there. Just mentioning it.
Amstrad CPC "Zynaps" Collision Investigation and "Fix" PokesBy 8bitTinShed, 2021 Covid19 Lockdown, AustraliaGreat game from 1987, with some collision detection issues.SCOPE - "Your ship explodes a number of pixels above a map object"DISCLAIMERS -1. I'm a beginner at Amstrad CPC Assembly, huge knowledge / experience gaps.2. Probably a few ludicrous assumptions.3. But hey the pokes seem to mostly fix the worst of the collisions with the map.-----------MEMORY:-----------0000-4000GFX Assets4000-8000 program code8000-FFFFscreen buffers for scrolling / flipping----------------------MEMORY DATA VARIABLES (used memory write breakpoints)----------------------7D45 = Ship Y collision data position? (default start position is value 08) //Top of screen ship position is 00 bottom is 0C - WTF only 12 possible Y values?? //But means working with a nibble which is fast? //Ship can move smaller units than this? - collision code on Y axis imprecise? //If my assumptions are right this not gunna be very accurate by design, hard to rewrite too. //INTERESTING - SET back to 08 with a poke and the ship is LOWER than start position7D43 = Ship X collision position? (default value 14) //min 11 left most edge, max 32? //more than nibble - and more accurately represents ship pixel position on X axis4980 = Base addy for collision data Y axis offsets? //TODO - Are they offsets for height? why do they not increase or decrease more evenly?4992 = e.g addy for data checked at default ship Y position offset from 4980 - when crashing into first blue tower //Data inside here never changes, these seem to be offsets49A0 = Scrolling map position data - populated from scrolling routine noted below.49AD = e.g addy - this is collision spot on first blue tower at default ship Y position-----------------HANDY BREAKPOINTS (I USED AT DIFFERENT TIMES) -----------------48C8 //start of the Y axis collision detection with map? 4922 //subroutine 48DF //the collision jump when we hit a map spot in B,C registers from routine at 48C8564B //Main loop's check of carry flag to jump to death code - 5659 //Death routine start. 48E2 //Collision - set carry flag.-----------------COLLISION ROUTINE //identified by working backwards from death routine, collision 4 pixels above a tower-----------------...48C8 LD HL,#4980 //(#4980 - 00 Registers (changing): BC C000 BC'2855, DE 0600, DE' 3F0B)48CB CALL #49224922 LD A, (IY+#06) // Load Ship Y position into Accumulator // (IY: nearly ALWAYS #7D3F = ALWAYS 55) // (IY+#06 - 7D45 = 08 default --> trying -02 instead -> ship moved UP (ship Y position??)4925 INC A //Add 1 to the ship Y position4926 AND #0F //logical AND ship Y with 0F - ensures it's in range, clearing left nibble - eg 09 didnt change but 19 would become 08 again4928 SLA A //Shift left arithmetic A = result of 08 y position is A = 12 - it gains an order of magnitude? worth noting more than a nibble now492A LD C,A //put A into C - (C is now 12)492B LD B,00 // blank B492D ADD HL, BC //4980 gets BC (0012) added to it result - HL = 4992 //(offset applied for address pointer based on ship's Y position - WHY!?) //(try another ship position, see what addy it points at) //(4992 is: 0E) //(higher - HL is 498E = 03) //hmm these never change - assuming an offset.492E LD B, (HL) //B now 0E - contents of memory at HL(4992) 492F INC HL //now pointing at 4993 - why? something to check there too.4930 LD C, (HL) // C now 00 (default flying at start)4931 LD HL, #49A0 // it's 00 atm, but might be a variable for collision...4934 LD A, (IY+#04) //load ship X position into accumulator...SKIP //- B AND C registers SEEM set for Y POS checks... //D & E are set here with ship X position, skipping for now, Y axis way less precise....493F RET //(back to 48CE)48C3 //WE ARE BACK HERE NOW...SKIP...48D3 LD A, (HL) //HL NOW 49AD = #78 - these populated from SCROLLING related routine.48D4 AND B //AND with B (still 0E from data var at 4992)48D5 JR NZ, 48E2 //78 AND 0E = NZ result - FOUND A COLLISION...SKIP...48E2 SCF //Set Carry Flag - we have a collision to flag - we check later48E3 RET //Last return before death routine? ...NOTE //runs same loop again, same result - jump from 48D5...SKIP......564B JR C,#5659 //IF CARRY FLAG SET trigger death routine (that's flag bit C from register F, not register C) -----SCROLLING MAP - //This is feeding into vars for the collision routine above-----NOTE //As games scrolls we get one block write per frame everything is shifting left/ up in memory ->420C LD HL,#49A2 //start reading from here and increment by 1 82 times (52 hex is in BD)420F LD DE,#49A0 //write what we read into here - scrolling collision detection. 4215 LDIR // writes to 49A0 -> 49AD too -> BUT only once per frame, no AF block decrement //SOOO what's feeding into the right hand side of all this? //RIGHT SIDE IS: 49F0 -> 49F14217 JP #4277 4277 ...SKIP...NOTE //THIS BLOCK scrolls top half of map? i broke it to confirm431A LD B,#40 // this value #40 is from A register on line below on the previous cycle431C LC (#431B),A // some simple self modifying code?431F LD (#49F0),A4322 OR B //THIS! - Writing to 49F0 (but not earlier in the sliding window)........NOTE //THIS BLOCK scrolls bottom half of map?436D LD B, #40 //this value #40 is from A register on line below on the previous cycle436F LD (#436E),A //some simple self modifying code (always sets it to 40?)4372 LD (#49F1),A4375 OR B //writing to 49F1 (second byte we write on the right hand side of the scrolling / sliding)4376 XOR C //this never seems to write to 49F1?? because C always same as B?---------THE "FIX" POKES (work in progress)---------These data memory locations seem to be data for comparing ship at different Y positions to the scrolling map data.I revised all the numbers in this range down by 1 over and overAnd I did this until I didn't explode unfairly aginast the scrolling map at that Y position.POKES - I stopped spontaneously combusting:498C 00 //was 01 - top height bubble thingy lvl 1498E 01 //was 03 - mid height bubble thingy lvl 14990 05 //was 07 - the first blue narrow tunnel thingy lvl 14992 07 //was 0E - the default starting position bllue tower crash lvl 1 4994 09 //was 1C - the first bottom bit of the map on lvl 14996 1C //was 38 - the tiny tiny little blue nob that you hit, and lowest pipes, lvl 14998 1C //was 70 - very bottom map lvl 1Test changes to these by setting a breakpoint at 5659 - and check value in register B. Register B is populated by these vars, and persists until the death routine condition.So this will tell you which of the offsets caused the collision in open space.----------------------------FURTHER THOUGHTS / QUESTIONS----------------------------Q1. What exactly are these "ship" data vars at 4980? Does anyone experienced know how to derive these values?So we can set meaningful more accurate values rather than trial and error *wink*Current guess - Assuming they are offsets for representation of the ship at certain screen positions But then why do they not increase or decrease more evenly... Or maybe a gfx format I don't know, but data seems too small for ship gfxQ2. Assuming I'm right about low precision design can we find enough free memory to hack in a new routine to improve the accuracy of the Y axis collision code? Maybe it would make scrolling to slow though...Either way I've never done that sort of thing, maybe it's quick for an experienced coder.If you read this far you are a bloody legend, and you need a stiff drink, cheers.
Page created in 0.131 seconds with 33 queries.