News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu

New member - advice?

Started by chri5, 10:48, 23 May 22

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

chri5

Hi all
New member here but a long time CPC 464 owner. I recently found my CPC 464 at my mums house, it was wrapped up and had been stored in a cupboard for 30 years. It was bought new in 1985 when I was 9 years old and was retired when I got an Atari 1040 STE.

Unfortunately I remember throwing the green screen monitor in a skip in the late 90s. So I'm looking for an RGB to SCART lead and power supply. Ideally I'd like to connect the CPC to a VGA monitor, any recommendations for doing that?

Thanks
Chris
CPC 464

Prodatron

Hi and welcome!

something like this works fine with the CPC, if you have a monitor with scart input:

https://www.ebay.co.uk/itm/390401137879?hash=item5ae5b89cd7:g:FDAAAOSwt5hYa-5s

Connecting the CPC to a VGA monitor is probably more complicated.

Best regards,
Prodatron

GRAPHICAL Z80 MULTITASKING OPERATING SYSTEM

chri5

Thanks, I will grab that SCART + PSU.

Would something like this box be able to convert the SCART signal from the 464 to VGA? 

https://kaicolabs.com/product/kaico-edition-open-source-scan-converter-ossc/
CPC 464

eto

Quote from: chri5 on 11:37, 23 May 22Thanks, I will grab that SCART + PSU.

Would something like this box be able to convert the SCART signal from the 464 to VGA?

https://kaicolabs.com/product/kaico-edition-open-source-scan-converter-ossc/

Yes.

Other options: 

- Scart to HDMI adapters (must support RGB - and no guarantee yours will work)
- RGBtoHDMI (available on sellmyretro.com)
- GBS8200 with GBSControl mod (least expensive, but requires a bit of soldering and a 3d printed case)
- a LCD TV with Scart input - used 15" models are super cheap and (imho) fit the set-up very nicely from their size.


All solutions share the same problems: Some CRTC tricks will not word and you won't be able to play some games. E.g. I use the GBS8200 with the GBScontrol mod and Ghosts'n Goblins is unplayable there. On a LCD TV it works. Relentless is another example that only works on a real CRT monitor and doesn't properly work on any of these 4 options.

However this cases are very rare. A few games and some demos will not work (fully). Still 99% of the games will run. 

chri5

#4
Thanks, that RGBtoHDMI looks interesting.
CPC 464

chri5


OK I decided to order an RGBtoHDMI from sellmyretro. 

I've seen a few CPC464 Power Supplies on ebay, any recommendations? I was going to get the SCART cable + power supply mentioned above but won't be getting that now.
CPC 464

Powered by SMFPacks Menu Editor Mod