News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu

Amstrad 6128 Plus tape mod not working

Started by Overkill, 18:29, 08 November 22

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Overkill

Hi all,

I'm trying to add a tape input to a 6128 Plus, I wanted to keep it simple and not add the relay, because I was going to use a TZXDuino (maybe a bad idea?). 

I've installed a 2N3904 with base and collector swapped around, (I think it's the collector, I've done it as the diagram shows.) And also, the 1K resistor. Then I've connected a 3.5mm socket to the second and fourth pin on header connector CP07 (I assume it doesn't matter which way around?).

I've tried loading a game with the TZXDuino and a tape deck, but I get nothing.

Hopefully someone can point out that I've done something stupid :)

Thanks for looking.





Overkill

Oh wait, I should connect to Tape Output?

And also it looks like I wasted time installing the transistor and resistor   :doh:

Overkill


eto


Overkill

Quote from: eto on 14:53, 09 November 22
Quote from: Overkill on 14:35, 09 November 22Now it works!  ;D
have you done anything special?
Connected it to the correct pins lol :) I thought it had to go to the mic-in, but it should go to Tape-Out

Bryce

If you aren't using a relay, you don't need the transistor or resistor either. They are only there to switch on the relay.

Bryce.

Powered by SMFPacks Menu Editor Mod