CPC464 Plus, Azimuth Adjust

[Rurnin Bubber]

Hi all,

On the closing stages of this restoration now, and I've come up against a niggling issue. With the top of the case OFF, the 464+ will load my cassette fine. However, with the top of the case put back ON, it gives me an read error. I did need to adjust the azimuth to get the drive reading at all, but because there doesn't seem to be a way to adjust it with the case on, I'm shooting in the dark. Any tips?

[ComSoft6128]

Never used these so can't say how effective they are but they might be of use:

https://www.cpc-power.com/index.php?page=database

&

https://www.cpc-power.com/index.php?page=detail&num=6853

[Rurnin Bubber]

Never used these so can't say how effective they are but they might be of use:

https://www.cpc-power.com/index.php?page=database

&

https://www.cpc-power.com/index.php?page=detail&num=6853

Cheers for the links. I found out earlier though that the C4CPC cart has the arn500diag test cart within, so was able to use that to fine tune the azimuth. I then disassembled the whole computer, and reassembled it to ensure EVERYTHING was sitting correctly, and it works a charm now.