Amstrad 464 ate tape, opened it up to find these issues.

Started by dalekman9999, 07:16, 14 January 22

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

dalekman9999

So my cpc ate a tape, opened it up and foundthese few issues inside. A small belt broken, this other rubber piece that im not sure where its from, and looks like there should be a belt where the tape counter is but there isnt so i gather that that is where the belt went around.
I was wondering if anyone could point me into the right direction for fixing it + what some of the stuff is for e.g that rubber piece. Thanks


Edit: had issues with uploading the photos so i put them on imgur

Edit 2 found a second rubber piece exact.same size. Both also have a break down yhe middle

Amstrad https://imgur.com/a/UJgaHUa

Bryce

The belt is just to connect the tape counter, it doesn't effect the general function of the drive. The other rubber part is your problem. It's the tyre from the centre idler. Take a look at the post here, you may recognise a similarity: https://www.cpcwiki.eu/forum/technical-support/unknown-command/msg159753/#msg159753

Bryce.

dalekman9999

Quote from: Bryce on 09:04, 14 January 22The belt is just to connect the tape counter, it doesn't effect the general function of the drive. The other rubber part is your problem. It's the tyre from the centre idler. Take a look at the post here, you may recognise a similarity: https://www.cpcwiki.eu/forum/technical-support/unknown-command/msg159753/#msg159753 Bryce.

Would you happen to know where i can order one of these? Tried checking out the person he mentions in that post however nothing comes up, i would assume either the store nolonger sells them or they dont ship internationally.
Or an alternative to it even if that is possible?

Bryce

No idea, but they are pretty much standard parts. Try to find an old deck with a similar wheel and "borrow" the tyre from it.


Bryce.

Powered by SMFPacks Menu Editor Mod