Print Page - GX4000 Help

Title: GX4000 Help
Post by: Beaps on 12:53, 17 November 14

Hi All,

I switch on my GX4000 today and all I get is this

(http://s30.postimg.org/4z9cmo0j1/IMAG0345.jpg) (http://postimg.org/image/4z9cmo0j1/)

It was working fine the other day. I checked the 7805 inside the GX and I am getting just under 5v input & output.

Any ideas what it could be?

Title: Re: GX4000 Help
Post by: Bryce on 13:30, 17 November 14

Hmm, not good. Have you cleaned the cartridge contacts? If that's not the problem, then the ASIC may have died.

Bryce.

Title: Re: GX4000 Help
Post by: Beaps on 14:52, 17 November 14

I just got through cleaning the slot.....same thing :'(

Title: Re: GX4000 Help
Post by: Bryce on 15:21, 17 November 14

Hmm, not good. I doesn't look like a RAM problem, so there's a good chance that your ASIC has failed. You can send it over to me to check it out if you like.

Bryce.

CPCWiki forum

General Category => Technical support - Hardware related => Topic started by: Beaps on 12:53, 17 November 14