News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_blackdalek

I think my 6128's expansion port is bad :(

Started by blackdalek, 04:57, 05 November 17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blackdalek

It's been months since I've had the Amstrad out to tinker with due to all the chaos going on everywhere. Anyway, my CPC's expansion port looks to be fine. All my other expansion devices seem to work fine - original multiface2, modern multiface2 for m4 board, the m4 board itself... however the Z-Mem card is still just causing random garbage and crashing whenever it is plugged in. Toggling the onboard settings switches makes no difference. I will try contacting Toto again, see what he thinks.
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

blackdalek

Well.... I've had the CPC in storage for past few years while raising my son and I really have not even had time to think about working on my cpc problem. He's almost 5 now so I think it's safe to get the cpc out again. 
I've just opened it up and checked the continuity of all the tracks i could see between expansion port and the components, then I also tested continuity of visible tracks from the z80 to other components.
I didn't find any broken traces :(
I still don't know why my expansion port doesn't work. Is anyone willing to give any other advice?
Can I post my cpc to someone who can fix it?
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

Audronic

@blackdalek 

Have you tried an other Z80
as most of the lines go directly to the Z80

Just a thought

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

blackdalek

Quote from: Audronic on 14:12, 02 May 22@blackdalek

Have you tried an other Z80
as most of the lines go directly to the Z80
Yes. You actually mailed me one to test with back in 2018 and we had no luck with that either.
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

Audronic

@blackdalek 

I have just repaired a CPC6128, one of the symptoms was a clicking RELAY.
Which is one of your symptoms in the first post.

After testing 20 Ram chips purchased from china and found 14 (FOURTEEN) FAULTY.
I replaced the ram chips that were on the mother board that were faulty with some good ones.
This also stopped the RELAY from clicking.
Perhaps it was an intermittent short in one of the faulty ram chips
Just a thought

Good luck

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

blackdalek

Quote from: Audronic on 23:53, 02 May 22Perhaps it was an intermittent short in one of the faulty ram chips

Just a thought
Sounds plausible. How would I test for that?

Cheers,
Fraser
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

Audronic

@blackdalek 

As you have an M4, can you put Noels Diags into it and run it 
and let it do the longer test
I don't use an M4 but I am sure somebody can help

Kep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

blackdalek

@Audronic thanks for the tip.
I found and downloaded Noel's diagnostic program.
With only the M4 board connected, the long "soak" test ran without any errors for 53 iterations before I quit it.
I made several attempts to run it with the z-mem board attached but it was impossible. CPC crashed spectacularly within 3 seconds every time. Random screen garbage, tape relay clicking, disc drive motors starting etc.
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

blackdalek

I made some short videos of the CPC Diagnostics test running.
First video shows the CPC with only the M4 board connected. The soak test runs normally forever until aborted by user.
 
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

blackdalek

Next video shows affects of running upper RAM test with Z-Mem board attached.
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

blackdalek

and once more... This time with nice error bars screen at end.
CPC6128 modded with ABBA switch. External 5.25" floppy drive with side switch and Multiface 2. Now also sporting a joystick splitter and M4 WiFi board.

Powered by SMFPacks Menu Editor Mod