CPCWiki forum

General Category => Technical Support => Hardware related => Topic started by: kamelie1706 on 20:30, 22 August 21

Title: M4 2.5C + CPC M4 adapter + case
Post by: kamelie1706 on 20:30, 22 August 21
Hi


Am I connecting the card and the adapter correctly (pin 1&2 to the right on both)?


Any adapted case? the following one seems done with connector sold on the other side of the board (without adapter?)
https://www.thingiverse.com/thing:4829910 (https://www.thingiverse.com/thing:4829910)

Last but not least .... how to upload properly images so they display nice on this forum?  ;D

Thx and long life to CPC
Title: Re: M4 2.5C + CPC M4 adapter + case
Post by: SkulleateR on 21:09, 22 August 21
Connect it the other way around please, Pin one/two to the left (when sitting in front of your computer)
Title: Re: M4 2.5C + CPC M4 adapter + case
Post by: kamelie1706 on 22:48, 22 August 21
Danke ... what is confusing is on the"CPC M4 adapter" it is written "jp1/jp2" on the right and there no way to plug the other way around (card needs to be up)


I do not fully understand why the card connector was not put on the other side (e.g. "rear side")  ???