Author Topic: Pinout of Schneider PCW/Joyce Expansion port  (Read 794 times)

0 Members and 1 Guest are viewing this topic.

Offline JonB

  • 6128 Plus
  • ******
  • Posts: 764
  • Country: gb
  • Liked: 209
  • Likes Given: 50
Pinout of Schneider PCW/Joyce Expansion port
« on: 20:21, 24 March 19 »
Hi

Is the Schneider expansion port the same as the Amstrad edge connector? Does anyone have a pin out?

Asking because I'm about to supply a uIDE-80 to a Schneider owner and I want to make sure the expansion port adapter header (which I will fit instead of an edge connector) will be the right way round...

Thanks
JonB

Offline TynH

  • CPC664
  • ***
  • Posts: 135
  • Country: de
  • Liked: 35
  • Likes Given: 18
Re: Pinout of Schneider PCW/Joyce Expansion port
« Reply #1 on: 20:55, 24 March 19 »
According to “Joyce - mehr als ein Textsystem” this should be the pinout for the expansion port:





Offline JonB

  • 6128 Plus
  • ******
  • Posts: 764
  • Country: gb
  • Liked: 209
  • Likes Given: 50
Re: Pinout of Schneider PCW/Joyce Expansion port
« Reply #2 on: 23:43, 24 March 19 »
Is there a diagram showing the orientation of the socket? i mean, where Pin 1 is (I assume top left but one never knows).

Offline Bryce

  • The Hardware Guy.
  • Supporter
  • 6128 Plus
  • *
  • Posts: 12.337
  • Country: wf
  • It's not broken, it just hasn't been fixed yet.
    • index.php?action=treasury
  • Liked: 4630
  • Likes Given: 484
Re: Pinout of Schneider PCW/Joyce Expansion port
« Reply #3 on: 09:26, 25 March 19 »
PM sent.

Bryce.