Print Page - Pinout of Schneider PCW/Joyce Expansion port

Title: Pinout of Schneider PCW/Joyce Expansion port
Post by: JonB on 19:21, 24 March 19

Hi

Is the Schneider expansion port the same as the Amstrad edge connector? Does anyone have a pin out?

Asking because I'm about to supply a uIDE-80 to a Schneider owner and I want to make sure the expansion port adapter header (which I will fit instead of an edge connector) will be the right way round...

Thanks
JonB

Title: Re: Pinout of Schneider PCW/Joyce Expansion port
Post by: TynH on 19:55, 24 March 19

According to "Joyce - mehr als ein Textsystem" this should be the pinout for the expansion port:

(https://i.postimg.cc/QxSC0WPX/57-BCADD7-78-B9-4-FD8-8-F68-1119-AFE71111.png)

Title: Re: Pinout of Schneider PCW/Joyce Expansion port
Post by: JonB on 22:43, 24 March 19

Is there a diagram showing the orientation of the socket? i mean, where Pin 1 is (I assume top left but one never knows).

Title: Re: Pinout of Schneider PCW/Joyce Expansion port
Post by: Bryce on 08:26, 25 March 19

PM sent.

Bryce.

CPCWiki forum

General Category => Technical support - Hardware related => Topic started by: JonB on 19:21, 24 March 19