General Category => Technical support - Hardware related => Topic started by: SkulleateR on 16:24, 15 June 21
Can anyone please tell me what original screws were used there (german CPC 6128) ?
Which screws? There's 3 different types on the case: 2 sizes of self-threaders plus the screws at the end that hold the floppy drive in place.
just for the case, not the ones for the floppy drive
The main screws are self tapping 3mm wide, 12mm long with a 6mm Philips head. One of the screws is slightly longer (14mm I think) and goes in the hole with the arrow marking (in the middle, rear of the case).
Perfect, thx a lot :)