Started by Cwiiis, 00:05, 17 June 22
0 Members and 1 Guest are viewing this topic.
Quote from: d_kef on 02:06, 17 June 22I had the same problem when I upgraded my 464+ and it turned out to be the SED9420. Luckily I had a second one to replace it with.d_kef
Quote from: Bryce on 12:54, 10 August 22Hi CWiis, there's normally a black wire connecting the ground near the power socket to a point on the floppy circuitry. This was probably done by Amstrad to resolve a ground issue on the floppy circuit. I don't see it in your pictures, is it under the board? If it's missing it might be the cause for your mod not working.Bryce.
Page created in 0.130 seconds with 35 queries.